Need a REV.9F sky remote code for PROSCAN PLDED3273-UK, need it asap please

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" of your device; that you want set-up code, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

try these

• Proscan 0047 0747 1347 0030 1922
• can you look inside battery compartment of your remote and see what rev it is should be rev 8 to work with newer tv,s

0028,0027,0022.0021. Try these codes. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. Or, do a search by type in the brand name of your device at its search box, and press "Enter".
http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/

need to know what revision it is, underneath the urc 1650-03 bit it should say: skyhd rev.9f where the 9f is your revision (using what it says on mine as an example) if you have a revision 9 remote try 2087 that worked for me

OK,

This really depends on which brand/model of TV you have and which Sky remote version. The code you need is specific to the brand/model of TV.

The Sky remote version is printed on a sticker inside the battery compartment. The older Sky remotes will have "RC1600/00" on the sticker. Newer versions will also have either "Rev 4", "Rev 6", or "Rev 8" on the sticker.

If you have a new TV and an older Sky remote (i.e. before Rev 8) your remote may not work with your TV and you will need to buy a new Sky remote if you want to operate TV and Sky box with one remote.

Please post back with your Sky remote version number and your TV brand and EXACT model number. I will then be able to provide codes for your remote and programming instructions.

Thanks.

Hi

Samsung
4 digits: 0060
3 digits: 065, 584, 037, 245, 476, 398, 516, 292, 318,037

Samsung (6000 series)
4 digits: 1340

As you used 0060 and it didnt respond please try to programma with the other 3 didgit codes.

If still you cannot programme it follow the below instruction:

1. To control your TV firstly switch on the TV set, point the Sky remote at the TV,
2. Press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice.
3. Continue with this process by continuously pressing "TV" then "Standby" then "TV" then "Standby" etc until the TV set switches off. This will start using the inbuilt codes to programme the remote.

Thanx

1. Turn your TV on.
2. Press tv on your Sky remote control.
3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.
4. Press tv on your Sky remote control again.
5. Key in the code 0157. The light on the Sky remote control blinks twice. If the light blinks once only, recheck the code you entered and start again at Step 1.
6. Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).

Sky HD Code is 1340 to enter it: -

Press TV

Hold down Select and Red Button at same time until Red LED flashes twice

Press 1340

Press Select and the Red LED will flash twice to confirm that it has been set up.

Now press the Power Button to confirm that it operates properly.

Samsung codes for sky reomte 0060 065, 584, 037, 245, 476, 398, 516, 292, 318,
037


Click here for the link

With your Sky + remote.

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0060

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter