Display lights ok, but shows no words or messages

The yellow blotching is your blue filter going out in the light engine. You will need to replace the engine, but the cost is so high you would be better off replacing your TV.

The wording on this question is almost word for word of a message I sent iGolf customer support. If it's my message I don't know how it showed up here on fixya. Sent it also to bushnell support, both said in essence that a demo unit won't work, although i have seen factory demo's being sold on various websites. 1 tech. @ IGolf uploaded to me 2 files EMBEDD01.GLF and SYSREG.SMI which I loaded on th my neo+ after deleting both of the 2 files originally on the unit. But again everthing works, satallite signal strong, courses are loaded but no yardage is shown. It seems to be working when mapping a hole on the course (front, center, and back) but on resume play hole shows no yardage.I believe it's the firmware that is in the demo unit. my ? to iGolf and bushnell was if there was anyway to update the firmware but neither gave me an answer.

hi,
Press the Display button on the remote to switch off onscreen displays.
ok

Have you tried dialling 1571 to make sure a voicemail isn't cutting in? When somebody calls you if they hear the words "voicemail", "mailbox" or even the word "full" then it is not the Fusion kicking in. Also, if it simply says "calls" then remember this is caller display which is checked by pressing the "up arrow" to view all of your missed calls. The last alternative is another phone on the line.

Assuming this has all been checked....

Press menu/ok, arrow up to answer machine, press menu/ok then menu/ok again so all the messages playback (you can't delete messages you haven't listened to). When they have played out, press the arrow down to 'delete all' and press menu/ok, the display should say "confirm?", press menu/ok. If it is definitely this telephone picking the messages, this will clear it.

first mobile was ok. problem was display white light. i changed the strip .now no white light and front keypad light .i changed the display,main strip also but of no use .pls suggest something

The protect message indicates that there is a problem with the final stage of the amplifier section. This unit will require repair as a reset will not clear this. There is an audio amp IC inside that needs to be replaced. Figure on about $15 or so for the part.

Dan

to play your messages

press the button with the speaker symbol on the handset it shows ans record on the screen, then press number 2 and your messages will play.

press * to delete the currently playing message DELETED will be displayed

to delete all your messages

press the speaker button ans record shows in the window, press the star button the display shows DELETE press ok to confirm the display shows deleted and you will hear a confirmation tone.
press c if you decide to cancel deletion

press and hold c to exit and return to standby

hope this helps you all,

If trying to Print in Word 2003 - 2002 - 2002

Click on tools > options > Print tab > Uncheck Back Ground Printing. Click on ok. Try Printing.

 

If you are trying to Print from Word 2007.

Click on Office button > Word options > Advanced > Locate Print options and uncheck Backgound Printing click on ok. try Printing

my Samsung A800 also lost its inner display recently. When I open the phone, the inner display lights up but fails to show any image. Outer display is mostly OK, once it had trouble to "lock" the image and after opening and closing the phone a few times the outer display showed the image with light and dark bits inverted.
Switching phone off and on restores the inner display most of the time, but the image only lasts until I close the phone.

probably your laser is weak,if you're not qualified to open pls, visit nearest sony service center to have the laser replaced.