At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
According to the operating instructions for the Hilti TE 6-A22, if the rotary hammer is running but there is no hammering action, it could be because the rotary hammer is too cold. To fix this, bring the tip of the drill bit into contact with the working surface, switch the rotary hammer on and allow it to run. If necessary, repeat the procedure until the hammering mechanism begins to operate. Also, ensure that the function selector switch is set to "Drilling without hammering" .
If this doesn't work, you may need to take your tool to a professional repair service. You can find a list of authorized Hilti service centers on their website.
if your model is a top load washer replace the lid switch likewise the same for a front loader you can find the lid switch and have it directly sent to you by looking up marcone appliance hope this helps if you are unable to make electrical and mechanical fixes plz call a technician although they usually charge between 125 and 189 for this simple install of a 30 dollar part
Hold the POWER button down for a few seconds. Thats how you get into the settings. Cycle through options with the measure button. Use the power button to go to the next option (eg, beep on or off). Press and HOLD the power button to exit this mode.
×