Hilti Drills - Recent Questions, Troubleshooting & Support
Model te14 hammer drill. how can I replace the chuck?
Use the chuck key to open the jaws of the chuck as wide as possible. Look down into the chuck and you will see a screw head. Use a screw driver to take this screw out BUT turn the screw CLOCKWISE as if you were tightening it as the bolt will have what is known as a left hand thread. With the screw bolt out put your key back on the chuck and using a wooden or rubber mallet give the key a tap as if to turn the whole chuck ANTI-CLOCKWISE. This should enable you to rotate the chuck off by hand. If it is still stuck give it a sharper tap.
on Oct 29, 2020
Te76 will run but will not hammer
THE TOOL IS LOW ON OIL. OR POSSILBE SEAL ISSUE, IT TAKES ITS OWN OIL, HAVE TO GET IT FROM HILTI!!! BE PREPARED YOU HAVE TO BUY A GALLON AT A TIME! IT HURTS!!! OR YOU CAN SEND IT TO HILTI AND YES THEY WILL BE MORE THAN HAPPY TO FIX IT FOR YOU OR GIVE YOU CREDIT TOWARD A NEW ONE, THATS HOW THEY WORK!
on Oct 09, 2019
Not finding what you are looking for?