Kyocera Mita KM-2530 Laser Printer will only print the first page not the rest.

Total equipment cleaning and replace the main charge wire

replace the main charger the problem will be solved

Call kyocera's free help desk Monday - Friday 9 am - 6 pm EST at:

1-800-255-6482

Are you using an after market toner? Sometimes the non Kyocera toner causes light copies?

Go to www.kyoceramita.com for software. Make sure you select the proper software specific to your model and computer operating system.

Log into your pc as admin and under the driver properties change from kpdl to pcl5
Its a combo of a problem with adobe reader and the KPDL driver

Your charge corona grid is shorting out. It either has alot of toner built up on it, (from not cleaning when you change the toner cartridge), or the blocks are bad. You could also have a bad drum ground where the drum makes contact with the machine frame. Only once have I seen a bad drum cleaning blade.

you need a USB A to B cable.

The drivers are at http://usa.kyoceramita.com/americas/jsp/Kyocera/downloadsupport.jsp

clean the rollers with alcohol. this will renew the rubber and clear up the problem

it's the the expansion card on the main board in the middle, has a yellow circular cmos battery. Either its faulty or popped out during moving the machine. if faulty, replace.