20 Most Recent Kyocera Mita KM-3035 All-In-One Laser Printer Questions & Answers

0helpful
3answers

Kyocera km3035 copying black copies what's the problem?

chk first drum unit if it good condition may be toner defctive /clean charger
9/9/2021 4:42:12 PM • Kyocera Mita... • Answered on Sep 09, 2021
0helpful
2answers

Can not get the output tray to use the finishing tray.

Do you mean you have internal finisher? Try to make any copy with staple it should comes out from there, if not you have to go to machine setting or copy setting , you do this by pressing menu buttom, and change the output paper to the internal finisher.

Let me know wat happen after. I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745
2/25/2020 7:53:16 AM • Kyocera Mita... • Answered on Feb 25, 2020
0helpful
1answer

Kyocera KM-3035 - Paper Jam 00 error. Paper removed, still not working.

Check to make sure that their is no paper that is jammed in the paper draw. Also open the main panel where you would change the toner and pull out the little draw underneath the toner, I believe it is marked A2. Make sure that there is no paper there as well. Another place that paper will sometimes hide is in the left panel by the duplex system. Sometimes a little piece of paper gets left behind and this can cause the system to think there is still paper jammed in the machine. If all else fails try restarting the system. If you are still experiencing a problem than I would recommend you call your servicing dealer.

Hopes this helps.

Henry
5/28/2019 11:36:41 AM • Kyocera Mita... • Answered on May 28, 2019
0helpful
2answers

RESET TIME FOR MAINTENANCE ON KYOCERA KM3035

1087*2 then 251 and press start it will bring some digits then you clear
3/7/2019 9:26:02 AM • Kyocera Mita... • Answered on Mar 07, 2019
0helpful
1answer

Why Kyocera prints all black pages?

check main charger assy.
10/18/2018 2:38:03 PM • Kyocera Mita... • Answered on Oct 18, 2018
0helpful
2answers

Hi

scanner card has to be installed in device. scanner file utility has to be use. Or card will have to configured to your network, scan to pc, scan to email, etc
5/17/2018 1:38:06 AM • Kyocera Mita... • Answered on May 17, 2018
0helpful
2answers

What is the code for KM-3035 printer's scanner network card?

Print/Scan System (U) 083H9503 Network Print Controller and Network Scanner
5/17/2018 1:31:44 AM • Kyocera Mita... • Answered on May 17, 2018
0helpful
5answers

KM-3035 scanning issues

the 30/40/5035 series machines have two network cards in them. One for printing and one for scanning. and they have separate IP numbers also. make sure you have scanfile utility running on your pc or wherever you are sending the files and the folder set up in the utility. then set it up on the scanner network card.. Not the printer.
5/17/2018 1:27:55 AM • Kyocera Mita... • Answered on May 17, 2018
0helpful
3answers

"unable to find destination" ERROR WHEN TRYING TO CONNECT SCANNER.

Are the TWAIN drivers installed on the computer?
4/27/2018 7:24:22 PM • Kyocera Mita... • Answered on Apr 27, 2018
0answers

Hello, At

Be the first to answer 6/6/2017 12:57:03 PM • Kyocera Mita... • Posted on Jun 06, 2017Be the first to answer
0answers
0answers
0helpful
1answer

KM-5050 Finisher not attaching, Why?

Make sure the connector cable from the finisher is plugged into the copier. Unplug the copier power cord first if you have to reconnect it.
4/27/2016 11:03:32 PM • Kyocera Mita... • Answered on Apr 27, 2016
0helpful
1answer

WHITE LINE THRU PRINT ON KYOCERA MITA KM-3035

clean the LASER glass for that color, if you dont know what that is get a tech out. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
1/30/2016 11:23:06 AM • Kyocera Mita... • Answered on Jan 30, 2016
0helpful
1answer

How to enter maintenance mode KM 3050

Press the STATUS KEY With the numeric key pad key in 10871087 (if done correctly the display will change and say ENTER MAINTENANCE ITEM) Enter 201 with the numeric key pad (follow the steps below): 1. Press the start key. 2. Select the [INITIALIZE]. 3. Press the start key. 4. Press the center of the + keys. Be sure to press three + keys displayed in order. The touch panel is adjusted automatically. 5. Press the indicated three + keys, and then check the display. 6. Press the stop key. The screen for selecting a maintenance item No. is displayed. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. Now to exit maintenance mode key in 001 with the numeric key pad Press the Start Key ( you should be back to the status screen, press copy key to go back to the copy mode) Remember do not go to any other maintenance mode or make any other changes.
6/26/2015 12:19:38 PM • Kyocera Mita... • Answered on Jun 26, 2015
0helpful
1answer

Remove paper jam 21

http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/11858/0/3035-4035-5035ENOGR6.pdf
6/5/2015 7:44:38 AM • Kyocera Mita... • Answered on Jun 05, 2015
Not finding what you are looking for?
Kyocera Mita KM-3035 All-In-One Laser Printer Logo

237 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Office Equipment & Supplies Experts

Kyocera HP Expert
Kyocera HP Expert

Level 3 Expert

532 Answers

Ekse

Level 3 Expert

13435 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Kyocera Mita Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Mita Office Equipment & Supplies

  • Kyocera Mita Office Equipment & Supplies

Most Popular Question

system error

  • Office Equipment & Supplies
Loading...