Flash light not working - Kodak EASYSHARE M1063 Digital Camera

Hi
1. The flash on this model Canon works only if you manually raise the flash. It does not rise automatically, and is only on the raised flash.
2. Flash on the module has a switch - it sometimes fails and then flash "does not understand" that she had to get involved.
3. Not working flash capacitor charging circuit - usually after any water
4. Flash lamp is not working - usually after a light blow
5. Command does not work (a piece circuit) from the processor to light the lamp flashes - after a blow or hit the water.

If you follow steps 1 - Raise the flash and the camera is turned on in the menu mode - "shoot with the flash" - but your flash does not work - the rest can fix broken only engineer to repair.

the signal indicator lights are suppose to flash in perticular time interval which is connected to a timer relay when the light flashes faster that means the other light is not working and the relay is getting double the current and moving faster so check the other light either the bulb is fuse or the current is not reaching up to the bulb

Doggy count the number of flashes ie 4 flashes pause 4 flashes if you are not getting any pauses
what lights are flashing the battery level lights or the speed lights? Are all the battery level lights flashing or there are 3,4,5,6 or 7 etc. lights flashing? if you are getting a pause between flashes the number of flashes will tell you the error. Your owners manual should tell what each code means. Hope this helps

for video, you need continuous lighting, not a flash.

if you are using flash lights on the art work, please follow the following steps

1. turn off your flash in cam since it bypasses the external flash and makes the picture look different.
2. turn your light settings to either automatic or "flash light or arc light".but do not set them to incandescent light!!!
3. turn your macro to on status if you are going to take a close up shots, but please note that close up shots work great in natural sunlight than at flash lights...
   

Flashed f ...time light flash...pump starts to work...doesn't spin...doesn't cycle...

try to replace the battery, maybe it's too weak

the printer when i on the swich the flashing light is on but can't work the printer

My camera is Praktica DC5.0 megapixel. The green light comes on when i want to take pictures, but the flash doesn't work

Set camera body for Internal Flash for Pop-Up Flash.

Set camera body for External Flash for parked flash on Hot Shoe.

[email protected]