Kodak EasyShare - Recent Questions, Troubleshooting & Support
Error E45 See user guide Kodak Easy Share LS443
Hello
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
Use
these at own risk as it may further damage the camera.
Firstly ,
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.
Other than that , I would take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
Regards
Andrea
Kodak easyshare c340 wont turn on
My EasyShare was doing the same thing your post describes, which is how I came to be at this website. I tried the one suggestion of turning on camera (I did so to the 'Auto' setting), then pressing the |O|/i button, which is the button below the 'delete' and above 'menu' next to the screen. That didn't work for me. I then tried the suggestion with the other modes on the power dial, no luck.
I then, from the off position, turned the dial the other way, to the 'favorites' icon, and it worked! I didn't have a memory card in at the time, so it made a noise almost like saying "uh-oh", with the message 'no images in favorites'. I then turned it off, then turned it to 'auto' again, good to go! The lens opened, green light remained on in all modes.
If this helps even one person, I'm glad.
Why does camera close down when I plug USB cable to pc have replaced cable & batteries
As soon as you connect a camera to a computer, the camera shuts down, because it only can act as a "dumb" memory stick.
Only more advanced camera's and special programs allow the camera to be connected and be monitored on a computer.
Nikon has Camera Control Pro 2 for its DSLRs. Only the software is over 100 dollars.
When you have installed Kodak Picture easy software, you can connect the camera to the computer and then after you switch on the camera, you can download the pictures from the camera to the PC.
Kodak EasyShare C633 6.1MP Digital Camera. I have a SDXC chip and my camera will not format in the camera. What do I do?
Question edited for FULL 'make model (what it is).
Question moved to 'make model' category.
Duplicate post deleted, two posts made into one. Refresh page to see your question published.
What size is your SDXC Card? The maximum supported it 2 Gb. It can't handle more than that and won't format.
https://kodakassist.freshdesk.com/support/solutions/articles/48001068427-what-size-and-type-memory-cards-can-i-use-in-my-kodak-digital-camera-
EASYSHARE C-Series Cameras accept:
- C1450, C1550: SD and SDHC memory cards up to 32GB
- C300, C310, C315, C330, CD33, CW330, C530, CD40, CD50: SD memory cards up to 1 GB
- C340, C360, C433, C503, C533, C603, C633, C643, C663, C703, C743, C875: SD memory cards up to 2 GB
- CD43: xD memory cards only
- All other C-Series Cameras: SDHC and SDHC UHS-1 memory cards up to 32 GB
https://www.memorycow.co.uk/digital-camera/kodak/easyshare-c-series/kodak-easyshare-c633-digital-camera#:~:text=Your%20Kodak%20Easyshare%20C633%20Digital%20Camera%20is,2GB%20Micro%20SD%20memory%20cards.
Manual
Kodak EasyShare C633 Manual
https://kodakmanual.com > kodak-easyshare-c633-man...
EasyShare C633 Camera User's Guide PDF File - Kodak EasyShare C633 Manual Table of contents: 1-Setting up your C633 camera ....1; 2-Taking pictures and ...
....
MOV format
The MOV format is an industry-standard format used by many digital still-picture manufacturers. As with the JPEG format used for still images (the primary purpose of EasyShare cameras), the MOV format provides a video capture file that can be used on most computer operating systems and platforms.
Kodak EasyShare digital cameras include the free Apple QuickTime player software. If you are interested in more sophisticated editing capabilities, many MOV editors are available from several companies:
QuickTime Pro from Apple Computer Inc. is the initial upgrade package to the free QuickTime player software.
Search the Internet using the phrase "QuickTime editing" to find many other sources of QuickTime editing software with a wide range of capabilities.
Removing the date stamp on photos
If you mean, removing the date stamp after it's already on the picture -- the only way I know of is the hard way, using image processing software such as Photoshop to change the date stamp pixels to the surrounding color.
If you mean, turning off the date stamp option so it doesn't get added to the picture in the first place -- I'm not familiar with your particular camera but the first place I'd look would be in the setup menu.
Photo size too large for email
You can do that in 2 ways.
1) Shoot the photo or video in reduced size (less quality). This can achieved by adjusting the settings in your camera.
2) Use 3rd party software like photoshop or Microsoft paint to manually reduce the size using it.
The on/off switch on my Kodak Z980 is broken. It
it happened to mine, the same way.
i had it unused since 2012
9 years later, today i decided to open it, and i found the problem.
it's a lever inside the power button that gone out of place
i managed to power the camera on again
I Downloaded my photos to my computer and when I
Remove the battery from the Camera then press and hold the power button for 30 seconds.
Then, reinsert the Battery pack and try to reset the camera to the original factory settings before using it.
Not finding what you are looking for?