Camra went into water

The camra lens block is faulty,it can be that maybe it fell,it can be replaced

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101

Sounds like you tried to turn it on while water was still inside and fried the circuits.

once out of the camera & deleted form the card, the camera will not display any of the images because it does not have that function. even jpeg images being the same format cannot be viewed.

This camra was not intended for outdoors. If you use outdoor you need a camera housing.

take in customer care

hello brother i have nokia n70 i opne camra but camra colour is black 2 camra not warking plz help me how i ripper my camras my email is [email protected]

buy another camra copy the sofwere cd an then return tha camra

Don't know if you still have the camera since this is an old post.

It's possible that something got knocked loose inside the camera when it fell. Also possible that that could be fixed but better left to someone who's good at opening up devices with small parts and putting them back together again.

There's a video on youtube (in three parts) where a guy takes one of these cameras apart to tighten the lcd screen and then puts it back together.
http://www.youtube.com/watch?v=Kt4K1X1jITM

If you know someone who's good at that kind of thing maybe they could watch the videos and try to fix the camera.

I encountered the same problem, just last night. If it is the same, the only way I could get it to turn off was by taking the batteries out and the lens still would not retract. After re-installing the batteries several times with the same result, it would not turn off, I did this: I re-installed the batteries and powered up the camera, I applied a little force/pressure to the lens and it went back in. After that the camera seems to be working fine. I hope this helps, Mike