Epsx3 emulator 2012 password - Linksys EPSX3 EtherFast 3-Port 10/100 PrintServer (Retail) (NTPRLSEPSX3L) Print Server

Go to Linksys, customer services for answers to these questions. (now Cisco). The answer could be also printed on the device tags, labels, or other attachments.

The ver # (not serial #) will be on the label either on the bottom or back of the unit. expressed as either v. or ver .
Here's a link to the manual.
Do a factory reset, then install like a new unit. http://downloads.linksys.com/downloads/userguide/1224638357428/epsx3_ppsx1_ug_0.pdf

there is no smackdown vs raw 2011 for pc, but u can emulate a ps2 one on pc using pcsx2 emulator

epsx3 password

i need serial number

Hi

Visit the emulator link below

http://support.dlink.com/emulators/di704p_revB/hwiz.htm

Once you open the link you would see the username and password screen, click ok and there you would have the emulator.

Check out the emulator

http://www.support.dlink.com/emulators/dsl2640b/306041/vpivci.html

the gateway ip is 192.168.1.1
the username is admin
password: admin

Thanks for using Fixya.com

try
usename: manager
password: manager

also try
usename: manager
password: friend

Firmware upgrade for your print server could fix your problem or kill your print server.

Try this first: SET UP A STANDARD TCP/IP port.
Set a static ip on the print server. Use that ip address to set up your STANDARD TCP/IP PORT. You can do this on the printers and faxes page.
Right click the default printer then click properties. You have to ADD A NEW PORT.

Good Day