20 Most Recent Linksys StackPro II 100BaseFX Distance Extender (DSHFXSC) Questions & Answers


Turn of router and laptop. Wait minute. Turn both devices on

Linksys StackPro... | Answered on Mar 04, 2018


You can get this driver, and any others, form the Acer site:
http://us.acer.com/
Follow the "notebooks" link.

Linksys StackPro... | Answered on Jun 28, 2010


Do u have a firewall installed? Norton gets thru being a recognized anti-virus, however check your firewall comands & exception and what is allowed.Change this rule or disable Norton/Firewall & try browsing. Also check your DNS & gateway of your ISP.....sodeep

Linksys StackPro... | Answered on Sep 28, 2009


You do have an internet connection, correct?

You must know the make and model and probably the version number of the device in question. You probably can get most of this information theough the Windows device manager. If not, look at the device physically. Google the name/model/version and presto, you will have some guidance. Look for the best match, go to the site, look for download/support and you should be able to get the driver you need.

Alternatively, you could go ditectly to the manufacturer site.

If you dont have an internet connection, I would suggest you get a flash drive and go to your library and use their computer.

I hope this helps.

Linksys StackPro... | Answered on Sep 07, 2009


check the internet connection and try to plug in cable and check if the problems persists..

Linksys StackPro... | Answered on Jul 07, 2009


go to acer and dowmload the drivers youve put xp on a vista machine.but you still require the vista drivers not xp ..and the acer drivers..then your pc will work.i had done the same thing

Linksys StackPro... | Answered on Jun 17, 2009


Hi borzou,

Here is a link that will take you to all the drivers that Acer has for the Aspire 3690.

http://www.acerpanam.com/synapse/forms/AcerDrivers/Aspire%203690.pdf?CFID=481869&CFTOKEN=51293709

Sincerely,

Agent Xiong

Linksys StackPro... | Answered on May 04, 2009


https://www.linksys.com/ca/support-article?articleNum=140923

Which model?
Go to the Linksys website and download the instructions for your model of extender.

Linksys... | Answered on May 18, 2020


just fixed one yesterday.
the power pack was no good.AC wall wart,
power green LED blinked endless. and the white logo, LED is dead..
a new pack fixed it.
also the wrong pack used, ! do not mix them up. oops.
first year 54G, v1 uses 5vdc pack.
at v2, and up all want to 12vdc pack,
bottom sticker on above failed was v6.
you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.?
first the ethernet ports must work, or wifi is doomed.

Linksys... | Answered on Feb 18, 2020


Good day,
This might be of help .
Steps To Fix Linksys Router Error 321:-
Step1:- Check the Firewall Settings
To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic.
Method2:- Run the Installation CD Again:-
The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD.
The users can get the instruction to setup router manually in the method 3.
Step3:- Try to Setup Router Without Installation CD
Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321.
Follow the below-given instruction to Setup Linksys Router without Installation CD:
First of all, connect the main computer to the Ethernet port on the router.
Then the users need to connect the modem to the Internet port on the router.
Now it's time to verify the status of the light that is blinking properly.
Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually.
In the setup page of the Linksys Router, the users can change the settings of the router as per their needs.
Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin".
Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices.
or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.

Linksys... | Answered on Feb 03, 2020


There are several factors that will affect or can cause problems in connecting your Roku to your Router.

If you're getting an error message on Roku like 014, 011, make sure to indicate it in your response. Normally, if you're getting 014 message, you can follow these steps:

. A simple power cycle resolves most of the issues. To perform a power cycle, please follow the instructions below:

1. Unplug the power cables from the modem, router and the Roku player.
2. Connect the power cable to the modem (after a minute). Once all the lights on the modem are lit, plug in
the power cable to the router and then to the Roku player.
3. Go to "Settings" and redo the complete Roku setup.

If the issue continues to occur, please try the channel 1 or 3. Should it persist, you may reset the Roku
player. Here is how:

On the back or bottom of the Roku unit, you should find a recessed little hole.
- Use a pin or paperclip to press and hold the button for 30 seconds (please ensure that the power light
blinks while you are holding it down).
The Roku device will reset to default and be ready for setup again.

If the problem continues, please reflash the software via the secret screen:
1. Press the "Home" button for 5 times.
2. Press the "Forward" button for 3 times.
3. Press the "Rewind" button twice.
4. Choose Update Software and the Roku player will then restart.

You can comment your serial number or the error message that you're getting. If your getting 011, just power cycle your entire network. Also, please make sure that you're not connecting the Roku to a Guest network. The speed of your connection matters as well. It should be atleast 1.5mbps.

Linksys... | Answered on Jan 27, 2020


The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.

Linksys... | Answered on Nov 21, 2019


You can get best linksys router support phone number at Toll Free Number ( 1-877-769-0969 ). Linksys router Tech Support number ( 1-877-769-0969 )

Linksys... | Answered on Nov 12, 2019


DO NOT CALL FAKE NUMBERS OR GO TO FAKE WEBSITES

Linksys... | Answered on Nov 11, 2019


this ones for you loser

Linksys... | Answered on Nov 10, 2019

Not finding what you are looking for?
Linksys StackPro II 100BaseFX Distance Extender (DSHFXSC) Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

download ethernet controller driver

  • Computers & Internet
Loading...