Help with my washer

Either the motor or the pump has failed.

Are you sure it’s agitating? If it isn’t agitating or spinning, then motor coupler is most likely broken. If it is actually agitating, but not spinning, clutch may be bad or article of clear thing could be lodged between basket and tub.

hi there.
this is all the info i can find on this.
Key Features

• Catalyst Cleaning Action with Direct Inject

• ENERGY STAR Qualified

• AccuWash Temperature Control

• Variable End-of-Cycle Signal

• 3-Tray Dispenser - Detergent, Bleach and Fabric Softener

• Quiet Wash Plus Sound Reduction System

• Ultra Capacity Plus - Stainless Steel Wash Basket

• 3.8 cu. ft. Capacity

• Multiple Cycles including Whitest Whites, Heavy Duty, Hand Washables and Add-a-Garment

• Multiple Wash/Spin Speed Combinations including High 1000 RPM Speed

• Delay Start

• 3 Temperature Settings

• Automatic Adjustable Water Levels

• Extra Rinse and Rinse/Hold Options

• Side-Swing Door

• SpillGuard Top

• Optional Stack Kit - 8541503
• or see if this link will help you out some more.

What is the capacity of front loading whirlpool washer MO GHW9150PWO...

Amazon.com: Customer Reviews: Speed Queen 3.3 Cu. Ft ...

www.amazon.com/Speed-Queen...Washer/.../B004ZO...

Amazon.com, Inc.Find helpful customer reviews and review ratings for Speed Queen 3.3 Cu. ... If you need more water in the tub you can hold down the reset switch until the machine ... I tried the delicate wash and spin cycle, but the clothes retain too much water and ..... It takes time to correlate the number of turns and the direction to turn it.Missing: overspeed

Commercial Washer and Dryer Problems

www.affordablelaundry.com/commercial-washer-and-dryer-problems

The water should shut off once it reaches wash level, if it doesn't, and water level hasn't... (these are the glass type fuses) be sure to turn power off before checking them. ... If you have the voltage in, but not out, it's the contactor. .... We repair: Speed Queenwasher, IPSO washer, Milnor washer, UniMac washing machines.Missing: overspeed

[PDF]View document in PDF

inspect the tumble dryer drum shaft - see image
inspect the dryer belt tensioner - see image listen for sound when electric motor is running

Sounds like the clutch may be slipping. Does it go into a high speed spin?

What is the model number of your unit?

when empty turn it upside down it should have three springs holding the washing machine to the frame
one mabe missing if that not the prob try leveling the load and make sure the leveling leggs are all
toutching the floor good luck

STABLIZE DAMAGED