ERROR LOCK CODE: LOC - Haier HWD1000

E1, F1 are Error Codes indicating a Control Board Failure, and normally time to buy a new stove.

https://www.google.com/search?q=Kenmore+stove+95004102+E1%2C+F1+error

LOC

How to Clear the Oven Lock Mechanism on a Kenmore Stove

https://homeguides.sfgate.com > ... > Home Improvement
Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch ...

Possible Solutions

There is no Error - Control Lock is activated

If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code "LoC" or "LC" (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.
Activating the Control Lock: Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. For each second CONTROL LOCK is held down, the display will count down one second: you will see "3," then "2," then "1" then "LC" or "LoC". You may still touch START to pause the cycle, or touch POWER to turn off the washer.
De-Activating the Control Lock: Touch and hold 3 seconds again to de-activate the Control Lock.
See your Owner's Manual for more information on setting the Control Lock.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

Hello Annie, thank you for allowing me to assist you!

I see you are still receiving error code "LOC" even after replacing the door lock assembly. Let's try unplugging your washer once again to determine if it is a false error code. It is important to wait roughly ten minutes and then turn your washer on. Before selecting a cycle, press OPTIONS and SELECT at the same time for 20 seconds until "LOC" is no longer displayed. If the error code does not clear, then your washer more than likely may be experiencing an issue with the control board or wiring harness. I hope this information helps to some degree.

I'm not sure what just happened here-I posted and my answer went away! Push and hold temp button for 3 seconds and LOC should clear-if you want to lock controls again repeat-cheers Denny

amana self cleaning convection oven displays an F9 code.

The LOC code merely means the control responded and locked the door. You'll find a tech sheet under the top panel of the machine to help guide you thru the diagnostic process, which is fairly involved.

LOC means it thinks the control panel is locked. This gives the ERR indication when you push the buttons. To unlock it you need to hold down the Options and Select buttons together until it reacts.

I know this may seem silly but - On the top right back corner of your washer hit it with medium force with your fist, this helps.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Hi.The control is in a "LOCK" feature. Press and hold the Options and Select at the same time until the "LOC" led goes off to take the control out of "LOCK" or to put it into a control "LOCK".

NOTE_ If this standard procedure doesn't release the lock, this will indicate that the main control module is damaged.

The LOC code merely means the control responded and locked the door. You'll find a tech sheet under the top panel of the machine to help guide you thru the diagnostic process, which is fairly involved.

LOC means it thinks the control panel is locked. This gives the ERR indication when you push the buttons. To unlock it you need to hold down the Options and Select buttons together until it reacts.

I know this may seem silly but - On the top right back corner of your washer hit it with medium force with your fist, this helps.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Press/hold LOCK for 5 seconds.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

hold down "OPTION and "SELECT" button at simaltaniously until screen resets. This should work for you.