Motorola t325 i paired my droid razr with the motorola t325. it was working fine for about 2 weeks now every time i get in the car it says battery level high and synced with droid razr.after about 30 seconds it says droid razr disconnected,and immediately says synced with droid razr. this is a continuous loop and connects and disconnects continually.i have tried deleting and resyncing them and the problem continues.what can i do?

Hello, Michael Tyler

To recover your password you can follow this steps
1. You need to access to your android device manager http://bit.ly/1bb3IjM

2. Sign in and select the *lock* option

3. Change your password

If this does not work try this How do reset my DROID RAZR

Regards
Kenny
Motorola Support

Hi
The Droid RAZR M is a non-removable battery device.And if you try to remove it, it is consider physical damage.
Please contact us to check your repair options.
Motorola Support Find Answers Motorola Mobility Inc
Regards
Marge
Motorola Mobility

If you repair it might ask if you want to share the PBAP with the T325. You can say no. That should help.

Was the Bluetooth working before? This is something that has worked for other users: Unpair and forget you phone/car pairing then, a Clear Cache Partition process then, re-pair all and try it out.
It's not a definitve fix but has worked for many people in the past.

To perform a Clear Cache Partition:
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/93162

Regards,
Gaby
Motorola Support

T325 Bond Pair

Mark
Motorola Support

it probably needs to be reset by taking the battery out for a few minutes or you can try checking to see if there are any software updates for the phone

1.Check the device's battery level for at least two bars of strength.
2.If the battery level is low, charge the battery.
3.If the issue is not resolved, remove the back cover.
4.Remove the battery.
5.Wait 10 seconds.
6.Press and hold the W key.
7.While pressing down the W key, re-insert the battery.
•The device restarts and after approximately 15 seconds, the 'Recovery' screen appears
•Release the power button but *continue holding the home button*, for another 30 seconds.
Step
Thanks

1. Turn off your phone when it's not in use. If you're not using your Verizon Wireless Razr, then shut it off. Your battery will last much longer if you regularly do this.
2. Charge your phone less. If you charge your Razr nightly, then your cell phone battery won't last long. Try to charge your phone only a few times a week to extend the battery life.
3. Keep your Bluetooth turned off when you're not using it. Applications, like Bluetooth, are notorious for sucking the power from a cell phone battery.
4. Protect your Razr from extreme temperatures. Your cell phone battery lasts longer if kept at room temperature.
5. Discharge the Razr fully. Before you charge your phone, let it completely die. You can extend the life of the battery by regularly discharging and then fully charging it.
6. Leave the battery in the phone. Keep the Razr battery dry and free of dirt to prolong its life.

your limit would have crossed
there are a particular no of devices that could be paired
Pair your Verizon Motorola Droid 2 smartphone with a Bluetooth device using these steps:
1. From the Home screen tap Menu > Settings app.
2. Tap Wireless & networks.
3. Tap Bluetooth settings.
4. Ensure that Bluetooth is checked.
5. Turn the Bluetooth device on and set it to discoverable if required.
6. Tap Scan for devices.
7. The Droid 2 should locate any devices in the area. You may need to enter a password. Most devices have a password of 0000 (four zeros).
The Bluetooth indicator should now show in the notification area. This indicates you are paired successfully.

I'm having that exact same issue, with my Samsung flip phone. Works perfectly for one call, but have to turn it off, and back on again to work again.

Just curious if you have a Samsung too?

I did try it with another non-Samsung phone, and it worked like a charm, without issue...so I have to assume it's my phone?