Dark screen on garmin ique 3600 pda

iQue 3600 Undo engl.V.6 Release

Hallo -
I mistakenly IQUE3600 my system 5 at the english version 6 updated, now I have a white screen,

there's nothing more.
Please help
~~~~~~~~~~~~~~~~
If your IQUE -Problem is not reparabel - I would sale it, for repair my

If your Garmin is beyond repair, I would rate this unit as a spare part for my broken
Buy
Wenn dein Garmin ist unreparierbar, ich würde dieses Gerät als Ersatzteil für mein kaputtes
kaufen

see "http://pinouts.ru/PDA/palm_m125_pinout.shtml

Hello.
You can find the garmin manual here.
Just type in your unit details.

I have a 3600 that worked perfectly until i hit the "UPDATER" icon at Garmins suggestion, it fried something but the screen and the rest of the unit are in great shape........ I could not shut the unit off so I took the batter out, the screen is fine, if anyone want it for 40 bucks, drop me a line......... [email protected]

Hold POWER button down while pressing RESET button

In the UK you can get them repaired at
http://www.satnavrepaircentre.com/garminrepairs.shtml

You can get a charger that fits in the tiny little charging port, on the lower right side next to the "cradle teeth". But of course you will STILL not be able to sync.
Radio Shack has a set of port adapters, the little yellow one fits. Be SURE to plug it in the correct way around. (Bring iQue to Radio Shack when you buy adapter.)

I think I have solved this problem.

Try this:

Go to my computer, right click -> Properties -> Hardware -> Device Manager.

Locate your IQUE 3600, or Palm.

Now, if your palm has a Yellow Exclamation mark on it, that means that your computer is not recognizing the Palm. Select
Driver details. Re-install the driver off the "Setup CD" that came with your IQUE 3600.

This worked for me.

Good luck!

Sound as though you shorted something on the main board when you installed the new battery. Just sell the unit for parts on Ebay

May be a hardware issue. I had similar behavior when I replaced my IQue 3600's battery. If the circuitboard inside wasn't seated properly on the contacts coming from the battery, the iQue would keep rebooting. Start by checking that all the external screws are snug (but not over-tight). If not, you can try to open the case to check the two screws inside holding the circuit board. But I'll leave that up to you, since I can't honestly guarantee that you're experiencing the same problem. (After all, you seem to be sure that it has something to do with the software...and you may be right.)