20 Most Recent
Garmin iQue 3600 GPS Receiver Questions & Answers
The backlight quit working
I have the same problem. I was wondering how you go this resolved. I am able to bring back the backlight by pressing the base of the unit where the buttons are, below the screen. It seems to fix it until you shut it down again.
The unit will run if
Hello,
If your GPS works with the AC cord plugged in but the battery will not charge then one of two things has happened. Since it works with the cord plugged in it is not the cord. Did you get a cheap battery to replace the one that was bad? Sometimes them cheap batteries don't work the way they should. The other thing it more than likely is the charging unit inside your GPS. When the charging unit goes bad the battery never receives the charge. Your GPS should charge as soon as you plug it in. Either send this to Garmin for a fix or buy a new one. If it's less than a year old I urge you to contact Garmin for a manufacture warranty repair free of charge to you. Here is their web address.
http://www.garmin.com/garmin/cms/site/us
Regards,
Tony
Is there a way to use ique 3600 with windows 7?
I am using Windows 7 Ultimate 64 and the iQue did not work. There is no USB driver and as far as I know there isn't going to be one. However, I did get it working by installing Windows XP mode and the Windows Virtual Machine on my XP system. You need to check if your computer can run XP mode and there are Microsoft tools to do that. After you get XP mode installed and running, there will be a virtual XP window on your desktop. Plug the iQue in its cradle and plug it in to the USB port. Use your iQue setup CD to install the Palm desktop in XP as you normally would. At some point, you have to tell XP to attach your iQue to the USB port. Near the XP title bar, there is a USB pull-down menu. Use this to attach the device. It will ask for a driver. Just say to use the Garmin-supplied driver. Wait until this finishes successfully. Before trying a sync, open the Palm desktop and go to Hotsync/custom and change everything you can to "handheld overwrites desktop" and save this. Push the hotsync button on the cradle. If it doesn't connect, go to the USB pull-down and click attach. It should work!
I have a Garmin iQue
If you are using Windows 7, this posting in the forum should help:
http://www.fixya.com/support/t3602076-way_use_ique_3600_windows_7
Thumbwheel of left side of IQUE3600 needs re-assembly
I have this same issue. Not sure yet what the answer is, but you will have to take it apart. The spring lays on top of the thumb wheel and the ends fit into notches so you have to seat one and then pull the other end back and up till it will seat in the notch. Then you have to place the thumb wheel back in place and put the silver cap on top. I had it all together but putting the unit back together just right will be difficult as my thumb wheel isn't seated right.. Guess you just have to keep at it till you line everything up correctly. I also had the problem with the brightness not being adjustable but haven't fixed that yet.
I have a Garmin iQue
iQue 3600 Undo engl.V.6 Release
Hallo -
I mistakenly IQUE3600 my system 5 at the english version 6 updated, now I have a white screen,
there's nothing more.
Please help
~~~~~~~~~~~~~~~~
If your IQUE -Problem is not reparabel - I would sale it, for repair my
If your Garmin is beyond repair, I would rate this unit as a spare part for my broken
Buy
Wenn dein Garmin ist unreparierbar, ich würde dieses Gerät als Ersatzteil für mein kaputtes
kaufen
Not finding what you are looking for?