I have a hp psc 750 and the screen is not english,how do i fix this issue?
Change the front-panel country or language on HP PSC 750. (From HP PSC 750 manual - bpu02250.pdf)
The following steps help you change the language for your unit.
To do this using the front panel
1 Press Menu.
2 Press 
until Maintenance appears, and then press Enter.
3 Press 
until Set Language and Country appears, and then prescant get it to read in english - 98782b3.gif />4 Press 
until the desired language appears, and then press Start Copy, Black or
Color.
5 Press Start Copy, Black or Color to confirm.
A prompt displays asking to select the country where your HP PSC will be used.
Specifying the country sets youcant get it to read in english - b3bb801.gifes applicable for your region.
6 Press 
until desired country displays, and then press Start Copy, Black or
Color.
7 Press Start Copy, Black or Color to confirm.
If you cannot read the menus to change the printer front panel language you may want to perform a "Partial Reset" of the printer.
Per HP :
There are times when a partial reset may be required to restore the all-in-one to proper operation. A partial reset does the following:
Reset the user settings to the factory defaults.
Reset the language and country/region settings on some models.
HP PSC 750 All-in-One Printer
Printer Partial Reset:
1. Hold down the "Cancel" and Left Arrow buttons while plugging in the power cord.
If that fails you can try a "Hard Reset".
Printer Hard Reset:
1. Verify that the unit is switched on.
2. Remove the power cable from the back of the machine.
3. Wait 30 seconds.
4. Press and hold the POWER button on the front panel.
5. Reinsert the power cable in the backside of the unit.
http://h20000.www2.hp.com/bizsupport/Tec...
×
How do i get the language back in english
417 views
Usually answered in minutes!
My cat walked across my printer and it now shows commands in German. How do I get it back to English?
i cannot read whatever language this is and im trying to get it back to english. i keep looking for sources and i keep coming up short. please give me some helpful feedback. ANYONe!!!!
×