Boston vr 2000 - Boston Acoustics Audio Players & Recorders

pretty straight forward and easy. If you are not sure have a knowledgeable person do it.

https://all-guides.com/manual/73875/boston-acoustics-vr-m50-speakers-8.html?page=3

donaldws1018 I was wondering if the static problem was resolved yet. I have a pair of the VR970's that don't sound so good either.

Don't blame the speakers just yet. Check your PC's audio controls to make sure it's not modifying anything and that your speakers are defined as speakers, not headphones.

Try running UNripped music to them. Solo piano is a difficult signal to reproduce.

Nice amp, huh? I have one plus some Cubes.

www.hometheaterforum.com /.../high-end-boston-acoustics-vr975-2-vr-mx-2-vrmc-1-for-sale

Try here

VR mode or Video Recording mode is a feature on stand-alone consumer and computer DVD recorders that allows video recording and editing on a DVD rewritable disc.
In VR mode, users can create and rename titles for the scenes. Also, if a scene is deleted, the space allocated by it will be utilized later without the need of reformatting a disc.
If the user would like to record on the same disc again at a later time, in VR mode, users may eject the disc and it will not be finalized by the recorder until it is manually initiated. For the sake of comparison, any DVD disc recorded in VR's competitor V mode (or Video mode) will be automatically finalized before it is ejected by the recorder. Disc finalization is still required if the disc formatted for VR mode will be played in another DVD player.
Currently, users can only record in VR mode with the use of DVD-RW, DVD-RAM and DVD+RW discs, (updated in 2000 to accommodate DVD-R (General)) [DVD players marked “RW compatible” and “DVD Multi” can play DVD-VR recorded discs] and on some recorders, also on hard-disk drives.

sounds like you have a leak in the intake between the carb and motor, check the gasket between the carb and motor.

Dan

Intake Air Tempature sensor located around the air box on that year I think its toward the back of the airbox. But deffinatly somewhere around the airbox. Hope that helps. To identify it get a service manuals wiring diagram. ,

mikuni tm 38 power yet and the igniton sem 12 v./ 160 w.a.v

more info would be nice. If you're using optical, make sure its securely in both the tv and your vr-405 receiver. I have owned the vr-405 since 2000 and i just purchased a sony 32xbr6. HDMI into the TV, optical out to the receiver, it sounds amazing!