SOURCE: monitor screen stays black even though it's on
Remove the memory from your unit - power it up it should beep if full communication is still happening across your m/board. No beeps you board has died. if it beeps and your using two diffent memory modules just fitt one leave the battery out and power it up = if no display pull power swap out the memory and try again. if display occurrs you have a defective memory module - throw that failed unit away
glenn
SOURCE: Compaq presario V2000
Try booting into the BIOS Screen and resetting to factory defaults. If that fails suggest swapping the hard drive out and re-install the Operating System - Save your old data and migrate the data off the old drive. You can buy an external drive adapter to connect the harddrive to a USB port to migrate you data.
Good Luck!
Testimonial: "Excellent answer ! Very helpful, very fast ! Thanks so much."
SOURCE: Compaq Presario V3500. Power up - 4 beeps and flash power light.
Try to ask the company what is happening
234 views
Usually answered in minutes!
×