I have a brother 115c, have installed a new cartridge in cyan, now it says there is no cartridge there, is there anyway i can get it to register the new cartridge?
I have just replaced my ink cartridges too and the brother dc115 will not recognise this. At times it says 'no cartridge' even though it is there and fixed in properly, then if I open and close the lid it just comes up saying 'rplace ink'. I am also a bit annoyed as having taken out the old cartridges they are still half full! Please can someone help. I have just replaced my ink cartridges too and the brother dc115 will not recognise this. At times it says 'no cartridge' even though it is there and fixed in properly, then if I open and close the lid it just comes up saying 'rplace ink'. I am also a bit annoyed as having taken out the old cartridges they are still half full! Please can someone help.
You can't post conmments that contain an email address.
Re: I have a brother 115c, have installed a new cartridge...
My Brother DCP-115C I have replaced colours Cyan and Magenta both colours still will not print. Ihave gone through the cleaning procedures still will not print these colours
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ok go to the brothers icon and double click on it run setup, they have a section for it after you install new cartridge. this will set it . might read "install new cartridge" as a caption
to the machine it doesnt know the cyan was replaced and still reads empty
hi!!! in that kind of problem maybe the sensor of the cartridge was damage thats why the sensor cannot detect when you install the cartridge. Try another cartridge or maybe try the to re-install old one if the printer detect the old cartridge that means the new cartridge was defective. Thanks
That definitely sounds like the cartridge isn't registering properly. I would take the cartridge back to where you bought it and ask them to exchange it with a new one. This can happen from time to time.
If the printer was new out of the box, contact the manufacturer for a replacement cartridge. You can reach Brother here
7777 North Brother Blvd. Bartlett, Tennessee 38133 1-877-BROTHER (877-276-8437) 901-379-1215 (fax) 9:00am to 8:00pm Eastern Time
i bought new inks and inserted them , when in fact its only the yellow inks is empty yet it sends me message that found no cartridges.. waah. this printer been with me for 8 years and had it clean last year only.. what to do?
Your printer will keep using the color cartridges to keep the printing head working even if you don't print in color. If you need to print only in greyscale, buy a cheap HP printer (Printer only, not a PSC) and remove the color cartridge.
I have just replaced my ink cartridges too and the brother dc115 will not recognise this. At times it says 'no cartridge' even though it is there and fixed in properly, then if I open and close the lid it just comes up saying 'rplace ink'. I am also a bit annoyed as having taken out the old cartridges they are still half full! Please can someone help.
×