You may have a defective USB cable. Try a different cable, or try plugging the cable into a different USB plug on your computer. If neither of these work, the camera may have a defective USB plug on the camera. Double check that the camera is turned on. If all else fails, you can copy the photo files by removing the memory card from the camera and putting it in a card reader built into your computer, your printer, or use a separate memory card reader. You can buy them at most camera and computer stores - they are inexpensive, usually less than $20.
159 views
Usually answered in minutes!
i have a fujifilm F810 and since loading SP3 i am unable to install the hardware.
it is recognized as a UASB mass storage device.
Wizard runs,
i point it to the drivers
then it says cannot install hardware
SP3 does not seem to be loaded correctly though as updates wants to keep installing it.
×