Have an SVA TV model# EV-1703 remote does not work. Have tried universal remotes and they don't work fully. I might get only one function and thats it. Any ideas out there on why the Universal don

You can use a laptop charger, as long as the connecter to the TV fits it'll work. I'm using one for my old set. I bought it from the Salvation Army for $5 without a power cord.

Hope this helps!

Return the tv universal remote where u bought it,get ur money back.If none of the tv univeral romote programming codes on the owner manual codes for ur tv make and model don't even work and don't have any responses for ur tv make and model functioning all.Try website like Remotes.com to buy the tv original remote or a very closed compatible clone one.

U tries those codes that came with ur universal remote owner manual codes for ur tv model already.Those codes don't work for ur tv.Return the universal remote,because any codes people give will not work either.Try website like Remotes.com to buy the tv original remote.

some universal remotes are used only tv play.they did not open menu .so you bought original remote and solve your problem. thank you.

Hello,

What is the problem of your monitor? I will appreciate if you can give details on the problem and i will be glad to suggest solution to the problem, once i have the information.

Take care.

When you say the remote doesn't get the channels I have to assume the channel entry behavior changed. I am not to familiar with this brand but these are the basics for most tv's. If you have not removed the cable input to the tv or unhooked anything before the problem started here are a few thing you could try. Push the menu or setup button on the remote and under the channel or setup option on the tv make sure it is set to Cable and not Air or Antenna. Run the tv through the auto channel search to reprogram the cable channels. This process can take close to 1 hour on some tv's since it has to scan through the digital and analogue tuners. This will allow your tv to add the correct cable channels and remove the unwanted ones. You should be able to enter the channel number or move up and down with the channel buttons on your remote.

Take it to Radio shack.
They'll have a cord that matches

have a new remote can not program it

The only remote that works is the one 4 all. Call ONE 4 ALL for the right model number. They then can program the remote on the phone to operate the SVA tv. It worked for me until the set died this week. Guess why I am looking on this site.

try these people as i hear they are good. The Office of Research Services at The University of Georgia P. O. Box 2187 ? Athens, GA 30612 ? Phone: 706-542-2411