Picture color on screen is all screwed up

Dull Video...

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

Convergence

* Screen Looks 3D, Warped, Distorted, etc
* Colors do not line up
* TV may shut off - and make a chirping sound.


You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Ur convergence it dead,know how to solder?Buy a convergence kit use what in that kit.Tries websites Tv Repair World.com,Ebay.com.

logitech cams only work in UVC mode not drivers

unless you have 10.3.x software on the mac. then you can run 8.0.1 on the mac. otherwise you need to upgrade the cam.

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/popup_adp.php?p_sid=ebAIcqDj&p_lva=228&p_li=&p_faqid=6471&p_created=1176155953&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MywzJnBfcHJvZHM9MCZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9MzQyOA**

here is a list of mac complaint cameras.

This is a issue with just the LCD it needs to be replaced.

Its bad ccd imager in camera and this part will be replaced.
Canon will repair Free of Cost A75 camera as per announced scheme.
Click Canon CCD Imager Advisory for details.

are these red fuzzy colors actually on photos or just on lcd i think u r gettin them on photos also if thats the case ur CCD is gettin faulty u cant help it changing the CCD is not recommended bcoz it will cost u like new camera u can buy a new one i think

See this link. This Canon service notice is effective world wide, and if Canon determines that your problem is due to a CCD image sensor failure (yours are the classic symptoms), they will repair your camera at no cost, regardless of warranty status.

If it is not a setting problems, and if the black and white is only on LCD and not on picture, then it is a problem with the LCD. Probably just the ribbon cable not well inserted into the connector.
Camera must be taken apart to fix this problem. Better to have the job done by a technician at a camera repair shop.

Do you have a led or crt display? It could be just your display settings. Go to control panel /display properties /setting tab / and try changing the screen resolution. If no difference try the color quality. You can change the color bits without hurting any thing. Just remember what you changed it from and to.
If this doesn't help maybe you'll need a new screen.

Better yet, go to Sony's website and describe the problem your experiencing. Have heard that they have sometimes offered to repair it for free as the problem is so widespread (Note that it's not on any recall list though):

http://esupport.sony.com/US/perl/emailform-di.pl?template=EN