SOURCE: RCA 32" SDTV
27V530t......my TV powers off and on all by itself and wont stay powered.Can you help ?
SOURCE: MY RCA SDTV TRU FLAT STARTED TURNING ITSELF ON AND
Speaking from experience here: RCA TVs have solder problems. If you have a soldering iron, the first thing you should do is pull the chassis out, flip it over and check the solder joint near the fly back transformer. (will look something like this).
Inspect carefully and look for cracks in the solder. Use this as a starting point then work your way across the board, reflow any bad solder you find.
I can't begin to tell you how many RCA TVs I have fixed just by doing this... too many to count.
I hope this was of some assistance.
167 views
Usually answered in minutes!
×