Need to setup scan to nework or scan to email feature on Di351 multifuction

You could set up the scan and send features according to what storage function you have available. It does not have to be only smtp email. See the scan setup procedures in the online user guide and select which option would suit your setup. Scan to folder is one option. You need to provide the URL or similar link in the settings.
Contents Scan

if you use windows platform, you can use scan to pdf , a free software that "do the job" for you.
here's the link to the feature's list:
http://www.scantopdfconverter.com/feature-list.htm
enjoy

Self Help Product Support Konica Minolta Business Solutions Inc


this should get you started might find the operator manual for the scanner part

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If your drivers are instaled correctly, the BROTHER Control Center working fine, and you have setup a mail account in say OUTLOOK or another e-mail software, you can scan to e-mail.
Put the document on the flatbed or the ADF, open the Control Center. Select the Scan function, and the Scan to email option.
The document will be scanned, the e-nail software will open, inviting you to enter the email address. that is all it takes.

"Scan to email" feature is dependent upon the TWAIN and MAPI supported applications. TWAIN and MAPI (Message Application Programming Interface) are standards that relate to "Scanning" and "Scan to email" features respectively. Applications have to support these to make use of HP Director. Not all email accounts are MAPI supported applications. The following are the ones which satisfy the MAPI criteria.

Microsoft Outlook Express 6

Microsoft Outlook Express 5

Microsoft Outlook Express 4

Microsoft Outlook 2000

Microsoft Outlook 98

Microsoft Outlook 97

AOL E-mail Version 8

AOL E-mail Version 5

AOL E-mail Version 4

If you are not using any of the above email accounts, you need to configure your email account with Microsoft Outlook/Outlook Express to use this feature. After configuring, you can use the scan to Email feature by perfroming the following steps.

1. Open HP Director/ HP Solution Center.

2. Click Settings -->> Scan Settings & Preferences --->> Scan to... Setup.

3. Select the available destinations and add them to the front panel destinations.

4. While scanning, you will receive a window showing the scan details which contains the section "Where do you want to scan?". Select "Email".

You need to setup the email server setting through the command browser of the machine. open the explorer and type the ip address of the machine. under Email scanning setup the email server info and you will be fine.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

you can easily go to google and type it in.... di351 service manual... and it will come up.....

This is WAY more than a few lines to explain if you aren't familier with the setup. An IT person will likely be required if you can't figure it out via the "web image monitor" settings on your own...go to the IP address of the printer via a web page, Login (username: "admin" / Password: blank). make all the proper settings in tcp/ip, Email, etc., and it should work.

After installing the printer software you need to program scanning software.
Below are the steps to program scanning software:

To program the Scan To button:

Select Start/Programs or All Programs (Windows XP)/HP/HP Laserjet 3050, 3052, 3055, 3390, 3392/Scan
Click the Setup to open the Scan To Setup Wizard.
Select the Change the destinations that show up on the all-in-one control panel when I press the <Scan To> button and then click Next .
Check the Allow me to scan by pressing the Scan To button on the all-in-one check box.
Choose the destination by moving them from the PC window (the left window) to the All-in-one window (the right window).
NOTE: The All-in-one window might contain items set up by other computers that are connected to the all-in-one. You cannot make changes to these items.
Click Update .
To Create a destinations:
Follow steps 1-2 from the above steps.
Select Create a new destination with settings that I will specify and then select Next .
Select the Save it to my computer and then press Next .
Select the scan preferences and then select Next .
Select the scan destination folder and file format type and then select Next .
NOTE: If you wish to use a custom folder for your scan destination, you will need to create the folder prior to this setup wizard in order to browse to it.
Select the quality level you would like the file to be saved as.
Name the new destination on the computer, check the Send this new destination to the all-in-one check box, and enter a name for the display on the all-in-one. Then select Next .
Confirmation allows you to verify your settings. Select Save .
Once the new destination has been saved, the new destination will be configured as one of the Scan To destinations on the printer.

well..the scan function is accessible from the main panel, OR the desktop manager. do you have a user manual for this elegant device?

http://tinyurl.com/6qcpgy