I need to replace a broken knob for a kenmore 24" stacked washer/dryer Model 11108875279

What is the model number of your unit?

Its a broken lid switch. Needs to be replaced.

how to remove the timer switch knob.

Hi,
That is not that hard to fix and you can easily buy the parts yourselfonline...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101

You need this to launch the procedure of creating your Citibank online login ID so prior to Citicards Login You will certainly currently be revealed your Citibank online login.

Give me a model number. Fridgedare and White westinghouse made some of these stacks for Kenmore. I'll need to know the manufacture. Reply with the whole model number and I'll help.

a stack unit is a very risky investment, altho it's understandable if you have limited space. if the hold downs on the washer are rusted out or broken thru you need to have someone weld them for you. That's how we used to do it where I worked but stacks are not usually easily worked on. I'm afraid you will probably have to get an entirely new unit or maybe a used one from a reputable used appl. dealer in your area. Check around, you might get lucky and find one relatively inexpensive

first of all. comming from a Sears Technician.. (don't yell) -- the delivery drivers only know about delivering stuff. they dont know too much,
if the two are the same size they can be stacked.
sometimes have to rig something up
and yes, for that model the top is removed, clips go on the rear and screwed at the front.
in some areas it is sold seperatly as a stacking kit

go to sears .com,click parts put in your model number(should be inside the dryer door)and get your part.or repair clinic.com-mike

Pull the knob off the timer and you should see the screws that hold it in place. Access is from behind.