20 Most Recent
Dual XD-6110 200 Watt AM/FM/CD Receiver with Fixed Face - Page 2 Questions & Answers
4 channel amp to a single dual voice coil sub
Search up Google and enter your amp (name and model #) , and it should show you a pdf manual of that amplifier and show you that , possibly a 3-channel set-up would fit your needs, 4 ohms is usually the lowest minimum for the middle mono channel. Then, you could run the other two L & R channels for your mids and tweets (in stereo) on the remaining two channels; thereby in keeping a single amp to run the entire system. Also, 2 ohms would usually be the normal minimum on same amp for stereo amp output abilities, so that could easily run 5 speakers off one amp. I did it for years on a RF-600a4 with one 12" sub, and two 6 1/2" midbass, and two tweets (usually Morels, or Image Dynamics). Hope that helps...
Cannot turn off demo mode on Dual marine Cd receiver
Mantener presionado AUDIO durante m?s de 3 segundos para acceder al men? de configuraci?n. Presionar moment?neamente AUDIO para seleccionar entre las funciones del men? y girar la perilla del volumen hacia la izquierda/derecha para ajustar o activar la funci?n deseada.
2 ohm amp to 2 10 inch dual coil 4 ohm subs how does it need to be wired
Is the amp a single channel? If so, the only way to connect the subs (without overloading the 2 ohm stable amp) is to wire each sub's voice coils in parallel (2 ohm) and then connecting the subs in series (4 ohms). If the amp is two channel, the subs can have their voice coils connected in parallel (as before) and then each sub connected to its own channel.
Not finding what you are looking for?