20 Most Recent
Dual XDVD8181 Car Video Player Questions & Answers
How do i by pass the parking brake no video
1. AUDIO CD METHOD (Permanent)
** Insert Audio CD
** Press PLAY
** Press STOP twice on remote
** Enter 26604 on remote
** Press ENTER
** Take out Audio CD and Insert a DVD
Credit: Myself via a DUAL Tech
----------------
2. DVD METHOD (Permanent)
** Insert a DVD
** Let it play until you hear sound
** Press STOP twice on remote
** Enter 26604
** Press ENTER
Credit: Adam P.
The blue warning screen should immediately go away after pressing the last digit of "26604." Still press ENTER as a precaution.
From here:
http://forum.ecoustics.com/bbs/messages/4/302701.html
How do i bypass the parking brake switch in order for my video to play
1. FACTORY RESET METHOD (Temporary)
(This isn't the most effective, but it is the easiest to try, so it's worth a shot since it apparently works on some units.)
** Go to the Menu
** Get to the Settings Menu
** Select <yes> to Reset to Factory Settings.
Credit: DKA
2. AUDIO CD METHOD (Permanent)
** Insert Audio CD
** Press PLAY
** Press STOP twice on remote
** Enter 26604 on remote
** Press ENTER
** Take out Audio CD and Insert a DVD
Credit: Myself via a DUAL Tech
----------------
3. DVD METHOD (Permanent)
** Insert a DVD
** Let it play until you hear sound
** Press STOP twice on remote
** Enter 26604
** Press ENTER
Credit: Adam P.
Sharp TV switches to "input 2"
There's an option on the menu to tuen 'demo mode' on and off. If it's set to on, that's your problem. It will be switching input sources every 2 minutes or so. Switch this off and it'll be ok again.
Se descompuso el mecanismo del
amigo solo presiona el boton de mute y power por 15 segundo, ambas al mismo tiempo y automaticamente te pedira un codigo de seguridad el cual es 122164 y listo el equipo arrancara normalmente.
Dual xdvd710
check on the main wiring harness you wil see a black box on the yellow wire. open up the cover. there is a 10 amp mini fuse inside. if it is blown replace the fuse. also check your main radio and accesssory fuses in your fuse box. if no fuses are blown check all wiring connections.
My dual xdvd710 was working
Hello,
your dual xdvd710 is having a power problem. The power board is defective that's why the dual xdvd710 is not powering on. One way or the other, the power board has been affected.
A component on the power board like capacitor may have been defective.
Detach the dual xdvd710 from the truck, get a screw driver, disassemble the dual xdvd710. Use a meter to read the power board of the dual xdvd710, in other to detect the bad component. Make necessary replacement and the dual xdvd710 should power on again.
Purchase the replacement online or at any electronics accessories store within your vicinity.
Good luck.
I've read thread after thread
You can buy the remote here:
Dual remote
The code however, will have to come from Dual, and you will probably need some proof of legal ownership since this is a security feature to prevent thieves from benefiting from their crime.
Just hooked up dual xdvd710
it sounds like a wiring problem i have seen these in many in dash dvd players. if you still have the manual just check your connections and your grounds there may be a short or mis matched wire
Not finding what you are looking for?