20 Most Recent
Dual XD-6110 200 Watt AM/FM/CD Receiver with Fixed Face - Page 4 Questions & Answers
XDVDN9131
First thing to try is to shine a light on it to see if there is an image that is there that you can see. If there is, the back light or the inverter is out. Let us know,
I have a dual XDMA7650. I installed it in the car
It sounds like you blew a fuse or the circuit relay. When installing aftermarket decks they should be wired independently and on there own fuse. Disconnect power to the deck and replace the circuit breaker or fuse to the flashers
I have the "Dual XDMA7650" receiver installed in
sounds like you have the two wires red and yellow mixed up. you want the memory to be constantly on so then the memory cannot be lost, and the red accessory to be switched on when the ignition is in the on position.The ignition, if on will allow your stereo to begin running.
My Dual XDM7615, will not even shut off and no buttons will work
unplug the reciver from the back of it and wait for 20 sec. and plug it back in, this should allow you to eject. now turn off your car and jush eject, when it opens to eject's push the release button on the back of the face like your removing it but instead force the face to completely go down, as far as it will go. now turn your car on and put a cd in and see if that works for ya.
2001 mazda
Does what fit into which model 2001 Mazda?
How do i bypass the parking brake restraint on my axerra axv820?
Attach the parking brake wire to a toggle switch and chassis ground. That way you can flip that switch and simulate the parking being applied, released and applied. Then you can watch movies, text, chat, etc., all while you're supposed be to being driving.
Parking break bypass axxera axv820
You can try attaching the parking brake directly to ground to bypass the issue. However, some systems require a change in voltage each time system is powered down. If this is the case, you can place a toggle switch inline with the parking brake wire, attaching one side to the wire and the other side to ground, allowing you to apply the ground and remove it when necessary.
My Dual XDM7510 display quit working and I can't
try checking the illumination light on the back of the radio if that doesnt work then try looking at the red ignitionswitch wire and make sure it is connected to the 12vt constant (the yellow wire)
Not finding what you are looking for?