20 Most Recent NEC VT695 LCD Projector Questions & Answers

cabinet lock need remote control to unlock

For the lamp all you need to do is navigate the menu. This option is always somewhere different in different manufacturers but it should be in somewhere like options or settings. Once you find it you can to a lamp reset back to zero hours.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Usually it's a warning that the lamp is either close to it's end of life or it has expired.

1,turn on the projector 2,pressing and holding the exit button on the projector for 10 seconds 3,ok We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry,Lampdeng Limited

one of the fans in the projector is defective Have a good day! We supply original projector parts: lamp, bulb, Lcd, Lens, DMD, motherboard, powersupply ... with high quality and competitive price. Jerry China Tel: +86 131788 67858 E-mail: [email protected] Skype: lampdeng.com YM: [email protected] http://facebook.com/lampdeng http://www.lampdeng.com

Did you unplug it before you replaced the bulb?did you touch the bulb?are you sure the bulb works?have you reset the lamp hour meter?did you replace all doors, screws and original parts?is the bulb securely in place?Here is your manual http://www.support.nec-display.com/dl_service/data/manual/english/vt695_491_manual_e.pdf

Press the help button on the remote for 10 seconds