NEC VT695 LCD Projector - Answered Questions & Fixed issues

cabinet lock need remote control to unlock

For the lamp all you need to do is navigate the menu. This option is always somewhere different in different manufacturers but it should be in somewhere like options or settings. Once you find it you can to a lamp reset back to zero hours.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Usually it's a warning that the lamp is either close to it's end of life or it has expired.

1,turn on the projector 2,pressing and holding the exit button on the projector for 10 seconds 3,ok We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry,Lampdeng Limited

one of the fans in the projector is defective Have a good day! We supply original projector parts: lamp, bulb, Lcd, Lens, DMD, motherboard, powersupply ... with high quality and competitive price. Jerry China Tel: +86 131788 67858 E-mail: [email protected] Skype: lampdeng.com YM: [email protected] http://facebook.com/lampdeng http://www.lampdeng.com

Did you unplug it before you replaced the bulb?did you touch the bulb?are you sure the bulb works?have you reset the lamp hour meter?did you replace all doors, screws and original parts?is the bulb securely in place?Here is your manual http://www.support.nec-display.com/dl_service/data/manual/english/vt695_491_manual_e.pdf

you need this ----------- Apple MC552ZM/A Video Cable Adapter HD-15 Video - Male Proprietary

Hi,

The first thing I would do is to clean the projector...it is getting too hot, the fan cannot move enough air.
A can of the compressed air like you use on a keyboard may help temporarily, but to really clean properly it will need to be disassembled and cleaned so it will cool properly. This may not be the problem, but it is the easiest thing to try first. Any other problem is probably fatal...

heatman101

Hello,

The steady orange light indicates that there is an error on the lamp of your projector. This is also the reason why it won't turn on.

• Ensure that the lamp cover is installed correctly.
• Check to see if the projector has overheated or the lamp usage exceeds 1100 hours (2100 hours in
Eco 2 mode and 1600 hours in Eco 1 mode). If there is insufficient ventilation around the projector or
if the room where you're presenting is particularly warm, move the projector to a cooler location.

The problem has to do with the lamp so have it checked.

Good luck.

Overheating.

Press the help button on the remote for 10 seconds

The bulb is not lighting.
Make sure the covers are going on correctly if I remember this one has an inner cover as well.
There is a little micro switch that needs to be operated by cover going on correctly.
also check the plugs / connectors are ok.

---

Please dont forget to vote this answer was helpful

Many thanks

------

Check the bulb hours remaining through the menu. The bulb gets dimmer with age, so it could be close to life expectancy (2000 hrs regular, 3000 hrs Eco) and failing. The indicator light is based on hours only and will shut down the projector after (2100 or 3100 hours of bulb use), so it could still be the lamp failing or a power supply issue, especially if it's dim right from start up. Hope this helps.

No reset other then resetting the hours in the projector's menu. This is for reference only and will not keep the projector from coming on. If the lamp will not light make sure the lamp cover is all the way on and nothing has broken off of it.

If it is blinking once every 4 seconds or so then the cover that goes over the lamp is either missing, open or broken. It will not look broken but a critical part of the plastic has probably broken off. This will happen even if the cover has not been touched. Without it the projector thinks the cover is missing or open. Try another cover if you have one to be sure.

In the menu under installation, select the proper orientation.

I had the same issue, what I figured out was that I never removed the lamp door correctly, causing a small plastic piece to break off. To see if this is also your problem, inspect the back of the lamp door, top right corner, if it seems a rectangular plastic piece is missing, thats the problem. It presses in a small button nearby the lamp to let the projector know it's safe to power on.

I've attached an image to help out.

Hello.

Connecting the nec to your tv, I think you mean you would like to get the TV's picture out from the NEC instead of the TV.

You need to connect your digital cable box or dvd player or vcr system, where the picture goes to the tv, to the projector instead to get it to display the tv picture.

Can't guarantee that it would work without knowing more about your equipment.

If that is not what you wanted to do then I do not know.

Blue LCD panel requires replacement.