HP LaserJet 600 M602DN Laser Printer - M - Answered Questions & Fixed issues

Go To Below official HP Printer Page For Your problem, HP Color LaserJet Enterprise 500 M551N Printer Error Codes and Support Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For HP Support

Error: 52.XX.00 Error To continue turn off then on Error Description: Laser/scanner error ? XX = 00 laser/scanner motor startup error ? XX = 20 Laser/scanner rotation errorcheck your printer scanner assy. need technician support.

Check here: https://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5145285&docId=emr_na-c04581727&docLocale=en_US

hope that helps Re cold reset

This indicates low fuser temperature. Likely the fuser has failed. Power off, reseat the fuser and then start again, if error repeats replace the fuser. Be sure to upgrade the firmware on the printer to the current revision as HP has made some adjustments to the DC controller on this printer to extend fuser life.

Make sure that the inner tray that the paper rests on moves through its whole range of motion. The most common problem I have run into, is that on the left hand side of the tray, where the paper level indicator is located, there is a C shaped piece of plastic that is supposed to be on both sides of the metal tray becomes dislodged and sits either on top or on the bottom of the tray and blocks the tray from moving through the full range. You will just have to jimmy it back into position.

99.09.67 Disk is not bootable please download firmware

Description

The product has a non-secure disk (solid state disk) installed as the boot disk, and it has been replaced

with a new service part. A new firmware image needs to be downloaded to the device.

Recommended action

1. Press any key to continue to the main Preboot menu.

2. Press the Help button to see the help text for the error. 3. Select the Administrator menu.

4. Select the Download item. 5. The user can now download a new firmware bundle to the product.

HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer - Restore factory settings:

When exactly did you get the error message 98.01.01? Was it while you was trying to do a firmware update? I found a forum support page regarding this error but so far it remains unresolved on many websites. I checked all of the LaserJet's error codes and, like in the forum link, it appears this is related to a bad firmware update or faulty connection during a firmware. I have heard of people just repeatedly trying the firmware update until it goes through. In fact, there is a firmware update for this printer. To get to the firmware update, go towww.hp.com/supportand type in your product name under Software and Download and press enter. Next, you will have to select which printer you have (m551n, m551dn, or m551xh). Once you select that, it will take you to a Business Support Page and the firmware updates are located on the left hand side under Setup, Install, and Configure and then in the middle of the page you will see "Firmware Download and Install." I will need to know a bit more information before I can help you with any of those steps, however. First of all, how is the printer connected to the computer? What is the Operating System and System Type of the computer (Windows 7 64 bit, Windows XP, Mac Version X.X, etc)? Are you able to print or do anything else with this printer? Answer those questions if you need any more help. Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For HP Support

please details which led is Amber

Amber , light ,means attentions and some times alert

set it for 2-2 sided mode

1. Click and select. (Settings) > Devices > Printers & scanners.
2. Select your product and click Manage.
3. Click Printer properties.
4. Select the Ports tab.
5. Select the Enable bidirectional support checkbox and click OK.

Or else google for troubleshooting.

Others have reported the same issue. https://www.google.com/search?q=HP+LaserJet+pro+m281+does+not+print+with+new+cyan+and+magenta+toners ..

Question edited for a lot more clarity.Duplicate question deleted. Refresh page to see your question.This is likely to be a computer issue not a printer issue. Connect it to a newer laptop to test the theory.You can try a reset, but the issue is not known.https://www.google.com/search?q=hp+laserjet+pro+500+color+mfp+m570dn+won%27t+print+for+10+minutes..

Question edited for clarity 'make model (what it is)'.

Find the IP address for an HP printer

Hewlett-Packard https://support.hp.com > ish_6039801-6039767-16 Find the IP address for an HP printer ; HP Smart app: From the app home screen, click the image of your printer, and then click Network Information to find the . ..

This video shows you how to fix initialization issues from firmware updates:

This video shows you how to fix a printer that is offline:

If there is still a paper jam in your printer, here is how you can fix it:

This video shows you how to clean the rollers on a LaserJet: