20 Most Recent Samsung Falcon 18 Corded Phone Questions & Answers

Hello,

Here are the likely solution to solve the problem.

First of all put off the phone for some time allow the phone to relax it self for about five minute then put it on again then note reaction of the phone,if the problem remain then apply this

As a samsung internet subscriber, you are able to check your samsung or the service provider email using the samsung Enhanced Webmail feature. This feature allows you to check your messages from any computer that has an Internet connection, which is helpful when checking email "on the go." With Cox Enhanced Webmail your email remains on the samsung servers until it is downloaded onto your computer. Mail that is not downloaded consumes your allotted 2 GB of mail storage space. To save server space, you can set up your Cox email account in an email client of your choice.

jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Instructions Outlook Express

1. Open your Outlook Express email program.
   
2. Click the "Tools" option that is located on the top navigation bar.
   
3. Select "Accounts."
   
4. Click on the options labeled "Add" and "Mail."
   
5. Walk through the email configuration wizard. During the walk-through process, you will have to enter the type of mail server Cox Internet uses, which is "POP3." You will also have to enter your Cox user name along with your "@cox.net" email address and password.
   
   
6. Click "Finish" when the email wizard alerts you that the email setup process has been completed.
   

Thanks and thanks for using fixy.

If you call Samsung customer service,I am willing to bet that they will tell you free.Good luck! Greg

http://www.telephonesystemsdirect.com/pdfs/iDCS_Keyset_User_Guide_10_2005.pdf

here is the user manual .. usually you would dial 9 to get an outside line .. or just push one of the open line buttons. No batteries are needed it gets its power from the phone line.

trying to recorded a different main message to phone, how do you do it?

how can I increase the ring tone volume on my corded Falcon phone

If you have vmail and no msgs and the only light that is flashing is the light at the top right of the display, what that is flashing for is someone set a msg to your phone from another phone on your system. Try this :

without picking up the handset , dial 43 .
the display should show the ext # that set the msg and an option to reply or clear . press the btn under the display where it says clear and the msg will clear and the light will go out.

At your phone, without picking up handset.

Press Transfer
Dial 102
use the volume key to scroll to EXT FWD
Press the Right soft key under display (The Btn just Left of the scroll btn under display)
Dial 9 plus your cell # and press the right soft key again
display will say (currently set = no) press the volume key up to change to yes and press right soft key again.
Press Transfer to finish.

Once this is set , all you have to do when you want to set fwd back to busy/noans to vmail, just dial 604. to change it back to external to cell phone just dial 606..

Here is the manual While the manual is on the screen press CTRL+F, type 'hold' in the box and press Enter. It has many Hold features http://www.hardwiretelecom.com/pdfs/Samsung%20iDCS_User_Guide.pdf ..

It is possible that the outside lines have been blocked in the programming of the Samsung IDCS 28D system. You can try the following steps to unblock the outside lines:

1. On a phone that is working, press the TRANSFER button and dial 200.
2. Enter your system password. If you don't know your system password, you may need to contact your phone system administrator or service provider.
3. Press 713 for "Line Block Release".
4. Press the button for the line that is blocked (in your case, all 4 lines).
5. The display should show "RELEASE OK" for each line that is unblocked.
6. Hang up the phone.

If this doesn't work, it is possible that the phone system may need further troubleshooting or programming by a technician.

To unblock the outside lines on a Samsung IDCS 28D system, you can follow these steps:

1. Press the "Transfer" button on your phone.
2. Dial "741".
3. Press the "Transfer" button again.

This should unblock the outside lines on your system. If this does not work, you can try resetting the system by unplugging it for a few minutes and then plugging it back in. If the issue persists, you may need to contact a professional to troubleshoot the system further.

It's possible that when you cleared the forward on no answer, the voicemail setting on your Samsung iDCS 28D was not properly restored. Here are some troubleshooting steps you can try:

1. Check your voicemail settings: Dial 604 and press the "Speaker" button. Enter your extension number and press the "Speaker" button again. The system should confirm that you have entered the correct extension number. If it does not accept your extension, try dialing from a different phone to make sure that your extension is still active.
2. Verify your call routing: Dial 601 and press the "Speaker" button. This will show you the current call routing for your extension. Verify that "No Answer" is set to go to your voicemail box. If it is not, you can change it by pressing the "Speaker" button and entering the appropriate code for voicemail (usually "72").
3. Restart the phone system: If the above steps do not work, try restarting the phone system. You can do this by unplugging the power cable from the phone system for a few seconds and then plugging it back in.

If none of these steps resolve the issue, you may need to contact your phone system administrator or IT support for further assistance.

If an extension light on your Samsung OfficeServ DS-5038S phone is flashing red and dialing the extension gives an engaged tone even though no one is using the phone, it's possible that the extension is stuck in a busy or engaged state. Here are some steps you can try to resolve the issue:

1. Check the extension: Go to the extension in question and make sure the handset is on the hook and that there are no other phones or devices using the line.
2. Restart the phone: Try restarting the phone by unplugging it from the power source for a few seconds, then plugging it back in.
3. Check the programming: It's possible that there is an issue with the phone's programming. Check the phone's user manual or contact your phone system administrator to ensure that the extension is programmed correctly.
4. Check the phone system: If the issue persists, it may be necessary to check the phone system itself for any issues that could be causing the extension to appear busy or engaged.
5. Replace the phone: If none of the above steps resolve the issue, it's possible that there is a hardware issue with the phone itself. Consider replacing the phone or contacting a qualified technician for further assistance.

It's important to note that some phone systems are configured to automatically put extensions into a busy or engaged state after a certain period of time to prevent unauthorized access. If this is the case, contact your phone system administrator to adjust the settings accordingly.

Hi, for the phone that is malfunction, you'll need to setup as if it was brand new. The outage probably caused it to lose most of it's memory from the initial setup. To avoid having any difficulties, please reference the manual as you're going through these steps. Thank you.

Not for outbound, only spammers and scammers do that. It is set by your telcom. Incoming mention in the manual https://www.manualslib.com/manual/949871/Samsung-Idcs-28d.html?page=31 ..

https://www.fixya.com/support/t6055012-samsung_idcs_28d

Feature Access Codes - Samsung iDCS 28D User Manual

https://www.manualslib.com > ... > User manual Samsung iDCS 28D Manual Online: idcs keyset, System Tones, Feature Access Codes. This User Guide Is Written Based On The Default Access Code For Using Sys- ... . ..

This appears to be the phone, Samsung iDCS-28 https://www.pcliquidations.com/p1489-samsung-idcs-28d-falcon This appears to be the Samsung 7100 https://www.samsung.com/us/televisions-home-theater/tvs/uhd-tvs/43--class-ru7100-smart-4k-uhd-tv--2019--un43ru7100fxza/ You have a phone connected to a television? Contact Samsung Support Direct. The phone doesn't have voicemail built in, so you are dialling your telco to get them. What you are pressing is a signal to ring the other phones.

Must reset all extensions with individual extension numbers after a power outage. Just the same as starting the phone out of the box. Thanx.