20 Most Recent BenQ DW1640 DVD RW Dual Layer Burner Questions & Answers

make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall hope this helps if this does not fix the problem it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

If it's mpeg2 decoder thats needed, as far as i know you have to purchase this, unless you have a retail copy of 'Nero6' or similair which has it built in. But also make sure you have the latest version of Media Player10.

It is possible to bridge to another power supply. There are simple tutorials on YT to help and the process is not very invasive, if you do not wish to harm the current bezel. I was unable to find a switch online to match the model number. Maybe try something close enough to match.

If no issue with other inputs, check the compatibility of the frequencies and refresh speeds.

Go to settings >> system >> About device. Find "Build number" and click 6 times fast on it. Now go to Developer options >> Drawing Section or Rendering Section >> Find "Turn off hardware overlays" or "disable hardware overlays" >> This will force the phone to always use GPU for screen adjustments. no more flickering.

These cables are not different on each brand, they all use the same cable type, so go on eBay and you can find what you need.

IgmGuru Offer one of the Best AWS Training online. The AWS Certification exam is intended to efficiently deploy AWS resources to design a solution based on customer requirements. The

Restoring your Joybook to factory default settings: This process will ERASE ALL data on your system drive C: and restore the system to the default factory configuration. If this option is selected, all programs you installed or data you saved on the C: drive will be erased. However, data on the D: drive will not be affected. a. To restore your Joybook to its factory settings, click Full System Restore - Factory default settings under the Restore tab. b. Follow the on-screen instructions to complete the task.

Obviously changed something. Check to make sure you haven't inadvertently muted the speakers. Go on your computer in the sound settings in control panel (manage audio devices) and ensure you have them set right.