BenQ Computers & Internet - Recent Questions, Troubleshooting & Support

0helpful
4answers

I tried turning on my Joybook r45 but there is no

Im not sure but for in some rare circumstances,especially perhaps Benq(they produce niche items as well ) there might be a load up procedure for the operating system--Consult or download theoperators manual for your model--with this manufacturer its too early to say you have no operating system but it also might be the case.
4/27/2022 12:58:14 PM • BenQ Joybook R45... • Answered on Apr 27, 2022
0helpful
1answer

Repair power button BENQ G2400WD

It is possible to bridge to another power supply. There are simple tutorials on YT to help and the process is not very invasive, if you do not wish to harm the current bezel. I was unable to find a switch online to match the model number. Maybe try something close enough to match.
2/23/2022 2:59:31 PM • BenQ Computers &... • Answered on Feb 23, 2022
0helpful
1answer

Hello I need help with my benq ms 500. Once I plug dstv or laptop on it, it goes off completely within 2 minutes. I tried to clean its fans n board but I stil have same problem

If no issue with other inputs, check the compatibility of the frequencies and refresh speeds.
1/27/2022 10:42:09 AM • BenQ Computers &... • Answered on Jan 27, 2022
0answers
0helpful
1answer

Have a benq s6 mid screen doesn’t come on and battery indicator is blinking , so I need a new battery? And is there a reset button on the unit somewhere ?

Go to settings >> system >> About device. Find "Build number" and click 6 times fast on it. Now go to Developer options >> Drawing Section or Rendering Section >> Find "Turn off hardware overlays" or "disable hardware overlays" >> This will force the phone to always use GPU for screen adjustments. no more flickering.
9/21/2021 6:37:51 PM • BenQ Computers &... • Answered on Sep 21, 2021
0helpful
2answers

Where can I purchase benq q5x3 signal cable

These cables are not different on each brand, they all use the same cable type, so go on eBay and you can find what you need.
9/14/2021 9:26:07 AM • BenQ Computers &... • Answered on Sep 14, 2021
0helpful
1answer

My benq joybook r45 won't boot. the battery is

a number of things could be wrong- bad ram, bad motherboard. a bad hard drive will still usually get you a post screen. if you are at least getting a post screen, i would look towards hard drive issues.
8/24/2021 10:27:25 AM • BenQ Joybook R45... • Answered on Aug 24, 2021
0helpful
1answer

I getting a white screen on my BENQ SD3731 LCD television. Any directions to fix the problem will be helpful

IgmGuru Offer one of the Best AWS Training online. The AWS Certification exam is intended to efficiently deploy AWS resources to design a solution based on customer requirements. The
4/6/2021 4:54:05 AM • BenQ Computers &... • Answered on Apr 06, 2021
0helpful
1answer

Good day. I have a BENQ joybook lite UI02 laptop and would like to do a full factory reset.. i am really struggling could anyone help out please?

Restoring your Joybook to factory default settings: This process will ERASE ALL data on your system drive C: and restore the system to the default factory configuration. If this option is selected, all programs you installed or data you saved on the C: drive will be erased. However, data on the D: drive will not be affected. a. To restore your Joybook to its factory settings, click Full System Restore - Factory default settings under the Restore tab. b. Follow the on-screen instructions to complete the task.
5/5/2020 12:15:40 PM • BenQ Computers &... • Answered on May 05, 2020
0helpful
2answers

Video player wont support mpeg

Hi,, try to use the TCPMP player software,, it plays almost every video and audio format... Good Luck!!
4/8/2019 8:57:41 AM • BenQ P50 • Answered on Apr 08, 2019
0helpful
2answers

My nephew gave me a benq 310 wireless mouse to try

Press on the front of the button on top and the battery cover ejects.
When you press the rear of the button it ejects the dongle.
3/28/2019 7:37:10 AM • BenQ M310... • Answered on Mar 28, 2019
0helpful
6answers

My ben t705 moniteur.... problem

I DID REPAIR A MONITOR WITH THE SAME PROBLEM. IT TURNED OUT, THAT ONE OF THE TWO HIGH TENSION GENERATORS FOR THE 2 LIGHTTUBES WAS BURNED OUT. BY REPLACING THE POWER TRANSISTORS AND THE 3 AMP. FUSE ON THE MAINBOARD THE MONITOR IS RUNNING AGAIN VERY WELL.
2/6/2019 1:57:31 PM • BenQ T705 17"... • Answered on Feb 06, 2019
0helpful
1answer

How to unblock freecell

most likely he has changed the permissions of the executable file for freecell.

Go to the following location in your pc

C:/Program Files/Games

right click on freecell.exe

Click on the security tab and uncheck the deny fields for every user group.

Click Apply

Click OK

then try to open freecell
8/24/2018 6:39:00 AM • BenQ 656A... • Answered on Aug 24, 2018
0helpful
1answer

Enter and right to burn -in off

just unplug, wait for about 10 or more seconds and it will be fine.
7/15/2018 5:55:28 PM • BenQ T905 19"... • Answered on Jul 15, 2018
0helpful
2answers

Reset back to factory defaults

To unlock the OSD

controls when the OSD is

preset to be locked, press

and hold the 'MENU'

button for 15 seconds to

enter the 'OSD Lock'

option and make
changes.

[email protected]

5/29/2018 7:24:17 PM • BenQ FP92W LCD... • Answered on May 29, 2018
Not finding what you are looking for?
BenQ Logo

Family Lines

1,608 questions posted

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Joaquim Martins

Level 3 Expert

1128 Answers

Joseph Hoffmann

Level 3 Expert

1756 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...