Top 20 AOpen (DUW1608/ARR) (914ID37202) Burner - Page 2 Questions & Answers

Clearly tell ur problem

You can find the documentation on this webpage (downloadable pdfs) http://www.asrock.com/mb/overview.asp?cat=Manual&Model=A55M-HVS This for the motherboard ASRock A55-HVS which supports socket FM1. Up at the top left of this webpage are links to other information about this m/b - eg overview, CPU support list, specs, downloads, etc 13.April.2014

There will be a screw or two on the side of your case. Follow these simple steps. Shut down computer. Disconnect all wires from tower and move it to a place, such as a table. where you can do the work. Using a phillips head screwdriver remove the screw(s) holding the case together on the side that is removable (usually the left side) Look inside the case, you will see a slot that matches your graphics card. It is called a PCI-E slot, look it up if you are unsure of what one looks like. Remove the metal tab that is blocking the hole in front of the slot, and slightly to the side. It will either pull out or be held in by a small screw (save the screw if it is there). Gently, but firmly, line up the graphics card's pci-e connector with the slot in the motherboard. It will require a firm, but gentle nudge to snap into place. Don't force it and make sure you are lined up. If it's seated correctly the metal slot on the front will line up with the metal tab you just removed. If you have a graphics card installed already, remove it. Reinstall the side of the case. Connect all wires, but this time connect your monitor's connection (either DVI (white), VGA(blue) or HDMI (black and gold) to the graphic's cards video port. Power on the computer. Here the steps can vary. If you didn't remove a graphics card earlier you need to disable the onboard graphics. I would need to know the manufacturer of your motherboard to give instructions on how to do it. Insert the disk that came with your graphics card and install the software included with it. Play games.

why not get it , in any language and learn to use the online endless translator.s no mobo told , but support ended in 2011. long ago. at aOPEN, they ended that product category, totally pick a year and look, https://web.archive.org/web/20111001000000*/aopen.com

the question is? must be laptop with dead RTC coin top of mobo>?

word laptop PC not said and is. aka: AOpen Barebook 1555 ,1555A - MS2137 first off AOPEN is dead for support 2011 on for PC or mobo they made, about 100 models is 10 years.? DOA, end of the line on support ,leaving what? you using google on this The manuals on the old 2003 PC at their TW , Ftp web site are gone now. for ages. about all you need is this, the coin cell idead. the echo of it is here. google found it by me. in seconds. https://www.manualslib.com/products/Aopen-1557-3897569.html let me guess your 10 year old PC is now dead, as all do? no symptoms told ,above is 1500 series, mobo. 2003 relic. for all poor folks not using a DELL PC, good luck that.

Hi, Do nothing with the hard disk. Remove it and mount it on another working machine. Use the second machine to run recuva.

check out drive

check memory, it is a system timer failure (if the beeps are short), usually its because of bad ram, but if u took it apart could be you just need to check how you inserted the RAM.

F8 key

no pc told at all the monitor power blink if PC dead or in standby

that means the PC is dead or in standby on most monitors no pc told at all so no joy

https://web.archive.org/web/20111001000000*/aopen.com all support ended 2011. gone with the wind.

it's gone https://web.archive.org/web/20111001000000*/aopen.com

What relay are you talking about? The only computer I know of that may have a relay in it is from the 1940s. Aopen didn't exist then.

That will depend on the motherboard model and the symptoms and when you get the beeps. Try giving us a chance to provide a fix and we will at least give it a go.

Hi,1> Click Start and then Control Panel2> In Control Panel, if you are in Category View, click on Switch to Classic View3> Open Regional and Language Options in Control Panel.4> Click on the Languages tab.5> Under Supplemental language support, select the check box beside the applicable language collection6> Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.Thanks..

Hello,1> Click Start and then Control Panel2> In Control Panel, if you are in Category View, click on Switch to Classic View3> Open Regional and Language Options in Control Panel.4> Click on the Languages tab.5> Under Supplemental language support, select the check box beside the applicable language collection6> Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.Thanks..

Hello you cam download the manual here:http://europe.aopen.com/download.aspxBy selecting mainboard and the model number.Good luck

learn to google, old PCs , as yours seems to be t ATX form factor and 250w to 500 watt ATX PSU that has bundles of IDE 4pin molex connecters there will work. legacy PSU. any will work. that era (IDE-PATA)