20 Most Recent Sharp VE-CG30U Digital Camera - Page 2 Questions & Answers

Sounds like condensation is forming on the inside of the camera lens or housing glass.

it is neither clear what sort of output your cctv cameras produce, nor what sort of input your dvr accepts. but, for the most part, dvrs record digital tv signals, whereas cctv cameras output analogue signals. so, even though you may be able to plug a cctv camera "straight" into a tv via a scart connector, it is unlikely that any scart connectors on a dvr have the necessary circuitry to accept such signals.

You should be able to use the buttons on your TV to adjust settings. Using the menu channel and volume buttons to navigate the menus.

Make sure the memory card is properly installed in the camera and is formatted. Also make sure it is the proper type and size rated for the camera. The connections from the camera to the memory card may be dirty or loose , also the memory card could be bad.Try a new memory card of the proper size if none of this works look for a new camera or see about having it repaired.

You do not need the driver just press the power button on the remote and it will come up as a removable disk

According woth your model, look in the Sharp site some Win7 driver, sometimes is diferent drivers for XP or 7.

Keep us updated.

Hi - Sorry your having problems with your camera. I'm assuming it's a video camera. the DEW warning is telling you there is excessive moisture in the camera. I suggest you take out the tape and leave the tape door open in a dry warm place for a couple of hours.
You could also take a hair dryer on LOW and keeping it at least six inches from the camera move it back and forth over the tape compartment for a minute or two.
Sometimes the DEW message comes on when there is no such problem which is a problem with the camera that will probably require service.

Good Luck, Mikeywaf.

go to menu on your camcorder and turn off the remote, that worked for me

Can you tell me the model of your device...
so I could give you the exact driver and procedure to install it.

Just post back.

Hi,

To order the replacement cable for your camcorder, you will have to contact the manufacturer's customer support department.

Here is the link to Sharp Europe contact page:
http://www.sharp.eu/cps/rde/xchg/eu/hs.xsl/-/html/contact.htm

Also, you can contact Sharp (Spain) customer support on this number (902 101 388) and check whether they have the replacement cable.

Hope this helps you. For more help and clarifications, please feel free to reply to this post with the complete model number of the camcorder.

Thanks for using FixYa.

Visit to the given link
http://sharecash.org/download.php?file=631280
please rate the answer if you find useful
thanks for rating............

Visit this website, it could be of help. However, you need to supply detailed information of your Digital Camera including the model and all accompanying information.
http://forum.devicemanuals.com/
Please indicate if this solve your problem.