20 Most Recent
Pitney Bowes DM800, DM800i, DM825, DM875, DM900, DM925, DM1000, DM1100 formerly 767-8 - Ink Cartridge, Red - Page 5 Questions & Answers
Model C355 serial #7123111 when I make copies it
Are you making copies using the ADF/Document Feeder? If so make a copy by laying your original on the glass. Do you still get the lines? Is there any change? If the lines go away then you need to clean the scanner glass. If they do not change or go away then it sounds like a drum cleaning blade and or drum problem. If this is the case then you should be able to see the lines on the drum surface.
When searching for information on your copier keep in mind it is made by Panasonic and is a model number FP7735
Pitney bowe 9920, incoming faxes have black
Have you changed the toner cartridge? Often the disposal part of the image unit gets full and leaks out when the cartridge is reaching the end of its toner supply. This will leave black messy streaks on paper, and also make a mess inside the machine. Look inside the machine, if there is a mess, it is the cartridge.
I need drivers for J624, please
The J624 looks like it might be only for use with a Digital Mailing system, and should be automatically recognized when plugged into a USB port on a compatible DM.
I can't find a pc driver--doesn't mean one doesn't exist...Here's a link to the Pitney Bowes support site... for whatever it might be worth.
http://support.pb.com/esearch/ui.jsp
Error C-0500 on a DL46 Copier.
Fuser unit malfunction code.Verify the continuity the heater lamp,thermistor and thermofuse.Clean it.For reset open the front door and close or press the service reset switch.
My Pitney Bowes 9820 fax machine says check
Service due and check printer may be two different problems
check printer may be a fuser or laser problem
service due may be a counter for a ozone filter that needs to be changed to make the EPA ha[[y. If you wait too long to reset the filter counter, it can go to a check printer and cease printing
To reset the counter, press function 99, yes,access code is ***1.yes
press 146, yes, then press 1 to reset, press yes. press stop to exit
Not finding what you are looking for?