Top 20 Soyo SY-K7V (SY-K7VKPE) Motherboard Questions & Answers

if your computer came with a motherboard disc the sound drivers could be on it

click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers

or you might download slimdrivers

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

note: it will find all of your outdated drivers

this is a free driver solutions

they will automatically search for and find the correct driverhope it helps

try here http://www.cmedia.com.tw/EN/DownloadCenter_Detail2.aspx?pserno=0&dtype=ALL

This is due to there is problem with memory slot or memory modules or memory has not been inserted. Check and rectify the same will resolve your problem.

Revert back for more assistance and give your valuable feedback/rating for the solution provided.

Thank you for using Fixya.

I have a PDF file for SOYO KT-600 Dragon Plus V2.0. I can email it to you.

Your monitor is failing due to age.

Either the cord isn't hooked up, a pin is bent, or the computer isn't sending a signal. In the last case, you may need a new graphics card.

Go to Device Manager - locate your monitor - delete it with drivers - reboot the system

this can be your computer issue not monitor try connect to other monitor and make sure your computer is working fine ,you can check all the lights on the computer are on and getting no beeps sounds usually you will hear a single beep when PC is booting well

you install a application in your pc application name is " realtek audio driver

screen n T-con faulty replace them

If you mean the light on your monitor is orange instead of green, it means the monitor is not receiving data from the computer. Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

The usual method is to press the menu button and follow the on screen prompts, have you done that?

Check for resistor and diode errors

The monitor is going bad. The capacitors that drive the screen are getting weak. It is too expensive to fix, you'll need a new monitor.

http://download.cnet.com/Net-Viewer/3000-2356_4-10034828.html

you need to read what the manual so you can work it out you have three codes to fix first before it will work

ENGLISH PLEASE.

http://www.elhvb.com/supportbios.info/Archives/MANUAL/SOYO/mp4vx2l10.pdf

It should be plug and play in MS Windows at least. Cnet claims to have some herehttp://www.cnet.com/topic-software/soyo-group-inc.html

hii,most probably your monitor needs technical assistance.. Bcoz in case of LCD screens the problem arises with circuits. I recommend you to get it checked from a technical guy.