20 Most Recent Soyo KT600 Dragon Plus Motherboard Questions & Answers


go to your computer store or ebay

Soyo KT600... | Answered on May 19, 2014


It has to do with the KT-600 series "anti burn regulator" and how it has a hard time with the XP2600 thru 3200 CPU's because they get so hot so fast... Try pressing the power on button again immediately after the long beep ends. Your computer should boot right up. Or, you can disable the ABR by removing the jumper from the pins on the motherboard. I haven't tried this because I like knowing the ABR works so good. It only takes a second or two to fry a CPU.

Soyo KT600... | Answered on Mar 16, 2011


Any "modern" motherboard will use BIOS SETUP to change settings, not DIP-switches nor jumpers.

Start the computer, and enter BIOS SETUP.

Soyo KT600... | Answered on Feb 28, 2011


You have to load windows, before you can load the drivers

Soyo KT600... | Answered on Feb 26, 2011


try blowing out all of the dust from your keyboard using a fine air blower from an air compressor making VERY sure there is no MOISTURE in the lines.
dust causes static which causes lots of problems with a computer and its parts
or if this does not fix the problem
click start control panel keyboard you can change your settings there
or you might have uninstall the keyboard restart your computer then reinstall it and its drivers
click start control panel administrive tools computer management device manager scroll to keyboard you might see a yellow question mark ? right click update driver
if your computer came with a motherboard disc the drivers could be on it
hope this helps

don

Soyo KT600... | Answered on Feb 20, 2011


Have you tried a different usb port, keyboard, check your connector and connections, is the usb
port hardwired or wired from a connector on the motherboard..

Soyo KT600... | Answered on Feb 20, 2011


If your CMOS battery is not retaining your system setting you will see this problem...One way to know if this your problem is to go into setup and check the system time, also stopping at the Flash screen
it could be waiting for user input...You could try changing your setting from stop on error to not stop
on error

Soyo KT600... | Answered on Feb 09, 2011


First off, if you recently upgraded the memory or CPU, put the old components back and see if the upgrade was the cause of the problem.

Next, make sure your power supply is connected correctly. Many motherboard need an additional power connector for the CPU. This will be specified in your MB manual.

Finally, make sure memory and CPU are properly seated in their sockets. Sometimes bumping into the computer or moving it can loosen them.

If you have multiple memory modules try testing using one at a time in different slots. This will tell you if you have a bad module or slot on the motherboard.

If this does not identify the cause inspect your CPU. Be VERY careful removing it. You may need to heat it up with a hair dryer to soften the thermal paste. Carefully inspect the pins/contacts on the CPU and socket to make sure none are bent, missing or dirty. Even if you don't see a problem the CPU could still be damaged. The only way to be sure it to try it in another computer or try an identical CPU in your computer. Once again, be VERY careful or take it to a professional.

Aside from that you may have a failure on your motherboard which is way too complex to cover here. You may be able to find capacitors that have the top split open or burn marks on the MB. The best bet is to have it tested by the manufacturer.

Please vote for my solution if it helps.

Soyo KT600... | Answered on Dec 09, 2010


Here is a link for them. just locate what you need on the page, download them, and run them.

Soyo KT600... | Answered on Sep 22, 2010


Loud beeps signal that the chipset isn't powered correctly - the motherboard has died. Replace it .

Soyo KT600... | Answered on Aug 11, 2010


search google for soyo kt600 motherboard
and find a link for the soyo website

Soyo KT600... | Answered on Aug 02, 2010


I have uploaded manual to FixYa site now. While it is being reviewed by site staff, here is the link to the original file: http://docs.google.com/fileview?id=0BzZBKlPMe_SjZjNmNTY5NjctZjgzYi00YWFmLThhNzQtYzkwYmI5NDRjZjAy&hl=en

Soyo KT600... | Answered on Jun 19, 2010


Hi:
Don't know if this will help you but on some motherboards there is a three pin CMOS jumper for the batterty backup, They come with a jumper on pins 1&2 to prereserve the CMOS Backup battery, this jumper must be remover to pins 2&3., in order for the system to even boot. You might want to check this out as I have install boards that must have this done first.

Soyo KT600... | Answered on Apr 21, 2010


go to soyo web site type in board numbers then look at mem used jim

Soyo KT600... | Answered on Mar 26, 2010

Not finding what you are looking for?
Soyo KT600 Dragon Plus Motherboard Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Soyo Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Soyo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Soyo Computers & Internet

  • Soyo Computers & Internet

Most Popular Question

am installing soyo kt600 motherboard in

  • Computers & Internet
Loading...