20 Most Recent
Teac (DV-W58GA-PUK) Burner - Page 11 Questions & Answers
Teac le5588fhd TV firmware
The firmware can be obtained free of charge by calling 1300 55 33 15 Option 1 or 2 and asking for it. This number is the Teac Aust helpdesk. You would normally need the serial number of the TV but this model had only 1 production run and there is only 1 version of the firmware. I am the National Warranty Service co-ordinator for Teac Aust.
Specifications nec fd 1137c
what are you looking for? Here is what I have:
LED Indicator:
Green
Interface Connector:
34-pin connector right-angled header connector
Operation Mode Write / Read:
2MB mode / 1.6MB mode / 1MB mode
Disk Used
(90mm / 3.5):
High density (2HD) / High density (2HD) / Normal density (2DD)
Data Transfer Rate:
500KBps / 500KBps / 250KBps
Unformatted Data Capacity:
2MB / 1.6MB / 1MB
Rotational Speed:
300rpm / 360rpm / 300rpm
Track Density:
5.3 track/mm (135tpi)
Track to Track Time:
3ms
Required Power:
+5V single (4.5V ~ 5.5V)
Signal Output Driver:
Open Collector TTL
Input signal Pull-up:
1K Ohm 30%
Function Setting at Delivery:
Interface Setting:Pin2: MODE SELECT input (LOW: 1.6MB mode) Pin12: DRIVE SELECT 1 input Pin34: DISK CHANGE Output
Other Function Setting:
1. Automatic density setting for 2DD (1MB) disk or 2HD (1.6MB/2MB) disk
2. LED Turn on Condition: DRIVE SELECT
3. Motor Rotating Condition: MOTOR ON
4. Ready and seek-complete gate (full-mask) for INDEX and READ DATA output pulses
5. Auto-chucking at disk installation
6. Auto-recalibration at power on
7. Frame is electrically shorted to DC 0V
Dimensions:
101.6 W X 25.4 H X 145 D mm excluding front bezel
Weight:
345g
Mounting:
Vertical/horizontal with spindle motor down
MTBF:
30,000 POH
Safety Standards:
UL, CSA, TUV
Not finding what you are looking for?