Teac Computers & Internet - Recent Questions, Troubleshooting & Support

Some free software for burning.
How to burn a Music CD.
How to burn data files to a disc (for other computers to read)

Teac... | Answered on Mar 31, 2020

This issue may occur if the third-party DVD decoder program that is installed on your computer is not compatible with Windows XP.

Teac CD-224E... | Answered on Feb 13, 2020

Hi Albert, for what you say, COM ERROR, corresponds to an internal communication problem, try disconnecting the TEAC, from the power outlet, wait a couple of minutes and reconnect it, the problem should be solved
This is indicated on page 26 of the User Manual
If not, you would have a more complicated problem and I suggest you consult a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil
Hola Albert, por lo que comentas, COM ERROR, corresponde a un problema de comunicacion interior, prueba desconectar el TEAC, del toma corriente, esperar un par de minutos y volver a conectarlo, deberia resolverse el problema
Asi esta indicado en la pagina 26 del Manual de Usuario
Si no es asi, ya tendrias un problema mas complicado y te sugiero consultar a un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil


Teac Computers &... | Answered on Aug 26, 2019

What operating system are you using?
NOTE: A usb floppy drive will not work when plugged into a USB 3.0 socket, you need to plug it into USB 2.0 if you have one.

Teac Computers &... | Answered on Aug 17, 2019

u can get your puk code from your service provider
Your phone will ask for PUK code when you entered the PIN code wrongly several times depending upon the mobile make. The mobile asks for PUK code so that unauthorized persons do not use your mobile for wrong cause.
To get PUK code please contact your service provider through phone or go directly to their office. They will provide you the PUK code for your mobile. The PUK code for mobile phone.so that you can open your phone. When you planning to call your service provider you cannot use your mobile as it is fully locked. Please use some other mobile with same network to call your service provider.
While you get the PUK code ,the service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only. If they are satisfied with your answers they will provide with the PUK code
DONOT enter the PUK code several times wrongly,It will block your sim card permanently.
This PUK code is FREE. You no need to pay any sum to get the PUK code
Thank You.

Teac... | Answered on Jun 10, 2019

mare sim blocked hai puk code ki waja sa ab kasa on ho ge

Teac... | Answered on Nov 25, 2018

There are two small black phillips screws near where the cable is, take those out. The opposite side from the screws is the cover, it pries off. You can work a flat tip screwdriver in there and see if you can pop it off without damage. Start on the sides.

If you're having trouble with that you can remove the rubber piece going around the outside first. I started where the floppy opening is, you can pry it out with a small flat tip screwdriver then just pull it out. Do the same for both sides of floppy opening.

Then you'll have to take the phillips screw by the motor to remove the drive from the case. There is another small phillips screw holding the cover, remove that and you can work the cover off. Now you can clean the heads.

To put it back together screw the drive cover back on, then screw it back into the case. Put the rubber piece in, then push the top cover back down till it snaps in. Then put the black screws back.

Teac FD-05PUB... | Answered on Nov 05, 2018

Try different USB cable and different port on your PC. Then look for driver and uninstall - plug back in and reinstall driver. Try above on another PC to help determine cause. If none of these work, I recommend a swap on a working laptop and use a boot CD known as EBCD to attempt recovery.You need another computer to make one of these, but make a EBCD, emergency boot CD. With this made, boot failed computer to the CD by hitting the boot sequence or similar message on initial powerup (BIOS). Then follow instructions once this CD boots up. See link below. I recovered one this way a few weeks ago. EBCD Reset Windows passwords

Teac 160GB... | Answered on Mar 07, 2018

Try using diskette in another pc drive,if it works copy data to new diskette, its not unusual for diskettes to wear out thro constant usage.

Teac Floppy... | Answered on Feb 03, 2018

Put the disc in any pc and use minitool partition wizzard.
You will loose the data

Teac HDU80/KIT... | Answered on Jan 20, 2018

hi Inthegrade.
there is a couple off ways to do this.
i think it best you go to this link and have a read up on the best way it could help you out.
how to transfer from external hard drive to Windows 8 Esus desktop Google...

Teac HDU120/KIT... | Answered on Dec 01, 2017

Not finding what you are looking for?
Teac Logo

Family Lines

536 questions posted

Ask a Question

Usually answered in minutes!

Top Teac Computers & Internet Experts


Level 3 Expert

8091 Answers


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Teac Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides