DeLonghi Classica CT14 Toaster - Answered Questions & Fixed issues

if your realy handy with a soldering iron you could re-solder all the joints and put a bit of wire over them too, if the circuit bord is in two bits clue it together first then skrape off any paint oner the copper tracks that need to be solderd before soldering them together again its worth a try a new bord would cost more that a new toster?

At this point the problem is nit solved.
will look into a solution before investing any funds on the solution. There are many free options to be considered at this point.

Jackie

The push down handles just pull off. Slip a butter knife down each side and gently twist both at the same time. https://www.google.com/search?q=Delonghi+AT+400%2C+4+slice+toaster%2C+remove+handles ..

Question moved from Laundry Dryers to Delonghi Toaster. The most likely cause is a broken element. Remove the case and check with a multimeter. Only the Toaster Ovens have a thermal fuse https://www.ereplacementparts.com/fuse-p-695579.html Videos on fixing toasters. https://www.google.com/search?q=delonghi+4+slice+toaster+thermal+fuse+replacement ..

het it and pour oil out then WIPE IT DRY

JAMES WE ARE NOT ASSOCIATED WITH DeLonghi but I have owned a couple things they made and could never get them to assist me with a FIX so I do not buy their junk anymore

bad power supply or heating element

Most self stopping kettles have a bi-metal piece, generally in the handle or top part, which, when boiling, gets one side of the metal to expand more than the other, causing it to bend and mechanically turn off the switch. There are many causes that it can stop working- iron fatigue, corrosion, jammed switch etc that can make it stop working. In general, it <strong>wouldn't</strong> be financially worthwhile to repair it, however many people still use them when they stay in the room, since they still do a decent job of boiling the water quickly. Typically they have a safety, so the thermo-fuse will shut it before a fire starts- on your own risk. It's usually not so expensive to get a new one, so I'd go for using it temporarily til I get around to getting a new one!

https://www.delonghi.com/en-us?nid=81

It is probably on the base or bottom of the fryer.

Defective heating element is the cause more than likely.

De'Longhi has the instruction manual for the CGH800 Panini Grill on the product support page. Click on the Support tab from the product page: http://www.delonghi.com/en-us/products/kitchen/kitchen-appliances/indoor-grills/cgh800-0179415002 . Look on the right hand side of the page. The direct link to the manual is http://www.delonghi.com/Global/InstructionManuals/EN/CGH800%20ENGLISH.pdf . I hope this helps. Cindy Wells

To the original vendor.

No. The bun is no longer edible.

Falling off the counter.

Does it work with bagels? How about pop-tarts?

take it back to whear u bought it

See if it has thermal fuses once you open it up. unplugged of course. Check the side that does not work for continuity of that fuse. Replace it if it is open and check the location to see if it is located too close to an element. Either crimp using copper brass or steel crimps or use ceramic wire nuts to attach the new one.Also look for a broken element. Depending where the break is, sometimes you can make it functional by overlapping the broken area, and that will make decent contact, or sometimes you need to add a metal ferrule and crimp it down.

Here:List

Hi and weclome to FixYa, I am Kelly.

The unit has a non resettable thermal safety device and the manual states this:

WARNING: The level must always be between the

maximum and minimum levels indicated.

Never use the deep fryer when the oil is below the

"min" level as it could cause the thermal safety device

to come into operation; to replace it you need to
contact one of our service centres.

I know this is probably not the answer you wanted to hear but your faced with contacting a Delonghi Service Center for replacement of the thermal safety device.

Service Ceter locators
USA
http://www.delonghiusa.com/index.php?service
AU
http://www.delonghi.com.au/maps/service_rep_locator_au.asp
UK
Customer Service line 0845 600 6845

Thanks for choosing FixYa,
Kelly