Top 20
Cambridge Soundworks The OontZ Questions & Answers
Disassembly instructions
A lot of those are sealed units. They are either glued or heated shut. If you don't see any screw holes then you have to decide if you want to use force or a saw to open then case.
4/17/2015 11:56:29 PM •
Cambridge...
•
307 views • 0 helpful votes
Why is there no bass?
Not much info to go on here, but my thought would be you have blown the woofers in the speakers, or the crossover in the cabinet, that separates the highs from the lows. . If you can touch the woofers with your hand, spread you hand wide over one, and try to move the cone. If it makes a scraping sound , the speaker is blown. If not,the crossover is probably damaged.
5/5/2014 3:13:50 AM •
Cambridge...
•
215 views • 0 helpful votes
Service center philippines
I am going to guess these are fairly old speakers. I would recommend getting a replacement system.
3/22/2014 3:24:52 PM •
Cambridge...
•
173 views • 0 helpful votes
Cav 2 2.1 speakers volume control is burnt
Short circuit in the board. Lcukily you can get a very inexpensive Universal Remote for almost nothing now. Shorts will smell similar to burned plastic, otherwise known as ozone. Discard the controller after removing batteries.
9/20/2012 5:43:41 PM •
Cambridge...
•
202 views • 1 helpful votes
Woofer has popping noise
I have the same problem with my Cambridge Soundworks CSW250. Also one of the speakers doesn't work all the time. I'm sure it's a loose connection on the circuit board. When I tap the subwoofer near the connections, the popping noise changes (gets worse, better, other speaker works,etc.).I tried taking the subwoofer apart, but the area near the connections is sealed with glue, so I cannot access it. I hate it because when it works,it sounds so good. Anyone know how to get just the circuit board and back panel?
8/9/2012 2:16:35 AM •
Cambridge...
•
373 views • 0 helpful votes
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
How do I change to degree mode on my porpo YH-2000
- Power Off: Turn off the device.
- Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
- Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
- Power Off Again: Turn off the device once more.
- Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
- Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
Not finding what you are looking for?