Cd is stuck inside i have unplugged & plugged and pressed eject & power at the same time
I had 2(!!) CDs stuck in transport. The firmware reset will NOT work as this is a physical space issue. As the eject device was attempting to spit out the cd, there was hope. Grab a credit card or similar sized object and a length of packing tape sufficient to wrap both sides of the card. While pressing the eject button, attempt to catch the cd face with the tape and pull gently out. In my case i had twins as the first cd came out with the card, tape combo followed by the second cd ejected by the drive. Fixed and extremely happy...
11/25/2023 10:38:58 PM •
Cambridge...
•
Answered
on Nov 25, 2023
Basscube 10 dead...need zener and resistor help
The zener diodes are 1N4774, I believe they are one watt. Try 3 watt metal oxide for the resistors. You might as well replace the 6800uF 63 volt main filter capacitors and the 220uF 50 volt capacitors while you're at it. Half the time the heat that cooked your other parts takes them out as well.
11/9/2021 11:07:46 PM •
Cambridge...
•
Answered
on Nov 09, 2021
CD Lid/door catch broken, will not stay closed
Chris, I know it has been a while since you posted this and I don't know if you ever solved your problem but if not....you might want to check out this sight. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=+Cambridge+Soundworks+c1muswke+cd&_sacat=0&LH_TitleDesc=0&_odkw=c1muswke+cd&
[email protected]
7/4/2021 2:49:34 PM •
Cambridge...
•
Answered
on Jul 04, 2021
The clock wont keep correct time.
change your batteries if it has any if that don't work your gears inside are getting slightly worn if clock meens lots to you . you can always buy cheap motors for it at Michels.good luck
1/12/2018 7:27:46 AM •
Cambridge...
•
Answered
on Jan 12, 2018
Not finding what you are looking for?