Top 20
Crate Cfs2 2 Button Footswitch (For Amps) - Page 8 Questions & Answers
How do I set my sustain to sustain on my privia px 555? My brand ne M gear will not sustain.
OK, first of all try this.
1) Connect the pedal
2) Turn on the PX-5S
3) DO NOT PRESS THE PEDAL WHILE THE KEYBOARD BOOTS.
4) Pedal should function normally
If the above procedure does not give you the desired results, then there's a few other things to check before sending it back for repair.
1) Back up all of your stage settings and try a factory reset.
If this works, then great.
If this does not work then
1) Back up all of your settings, reinstall the latest firmware, then initialize the keyboard with a factory reset.
If none of these procedures works, then you have some sort of hardware problem and need to get an RMA to return the unit for repair.
3/19/2019 11:29:22 PM •
Music
•
313 views • 0 helpful votes
We are experiencing reverb through inputs
Not much info to go on here. Maybe you're picking up a ghost signal loop from an amp into a microphone then it repeats.
Maybe you can provide more info
2/19/2019 5:42:46 PM •
Music
•
163 views • 0 helpful votes
My dstv is not showing infomation on channels is blank on channels info please help
Try this qiuck solution as it works most of the time:
Switch off your DSTV Decoder or Unplug power supply cable at rear of Decoder.
Remove your Sim card and wait 90 seconds.
Switch your DSTV Decoder back on or plug Power supply cable back in at the rear of your Decoder.
Enter your Sim card and wait for your Decoder to re-scan (about 2 - 3 minutes).
12/12/2018 12:02:44 PM •
Music
•
695 views • 0 helpful votes
Not finding what you are looking for?