Coleman Powermate Subaru 5000W Portable Generator "runs rough" Questions

...runs rough then dies, several tries and it will run rough and eventually smooth out and run ok, also intermittant loud clicking sound,think its the fuel pump sounds like u need a new fuel pump when u ...

...runs rough n shuts off? the 30 runs fine. thought maybe shrt in the line or breaker went dead. genset runs rough under load. or voltage reg.email me at brianwaynehoffeld at gmail. com thanx guys To ...

...runs rough. Looking for some advice. 1st check you have set the Air Mixture screw correctly. It should be 1.5 turns from tight (done up). This is the most common problem.

If it still runs ...

...runs very rough. it accellerates and decellerates by itself. Try getting a rebuild kit for the carb. Also change the spark plug. I know you cleaned the carb, but sometimes you will need to change the ...

spark or valve adjustment. When an engine runs rough it will not burn all the fuel, which will create excess fuel in the air cleaner housing. Also, make sure the the float is closing in the carberator

runs rough when choke pushed all the way to run position The generator starts easy when in full choke. When the choke is pushed half way back, it runs well. However, when choke is pushed further ...

Small 7kw Generac has always sounded rough over the three years we've had it. Oil and plug are fine but lately, after warmup, engine seems to misfire and eventually shuts off during the normal weekly ...

runs rough Starts hard on full choke runs on half choke and runs rough in run position Fresh fuel? Does carburetor have adjustable jets? Turn the high speed jet (at bottom of float bowl) about 1/4 to1

...Runs rough for first 30 seconds on startup. Sometimes will not stay running. Runs fine after 30 seconds. look for fuel puddling in the carb area (strong fuel odor on start up or after primering) may ...

...runs rough When in full choke, it starts well. Then runs well when pushed halfway. Begins to choke out and runs rough when pushed to run position. Also, where can I get a manual for this generator? ...