Kodak EASYSHARE G610 Thermal Printer "print cartridge" Questions

...Print cartridge When the print cartridge contacts are dirty and the printer cannot detect/communicate with print cartridge. Clean the contact points on the cartridges with a dry, lint-free cloth. 1. ...

...Print? The color cartridge is empty. I am trying to print in grayscale. The printer will not print anything until the color cartridge is replaced... Why is this... I don't need to use color! ...

Print head issue, new ink cartridge but will not print. Have deep clean and reseated the cartridge. ? Suggestions ? I have changed cartridges and cleaned print heads still wont print anything.

low" or "Color ink cartridge is low" message is displayed, print quality can be affected.8.Reprint the original picture or document that had the quality problem.Hope this helps. Thanks for using FixYa

...print job.NOTE: Once the "Black ink cartridge is low" or "Color ink cartridge is low" message is displayed, print quality can be affected. Reprint the picture or document that had the quality ...

...cartridge and the print head, tried pressurizing the cartridge and ink fills the lines and comes out the print head on all 5 colors but you can watch the ink disappear out of the lines and they fill ...

...print head is either clogged or the replacement cartridges you purchased are dry/defective. Try performing a head cleaning cycle and check the cartridges for proper ink flow. To do this, pull the ...

...cartridge in following the replacement of the print head & its still saying replace which I have done again, two brand new cartridges wasted. I believe Kodak's all in ones do not measure the ...

go to your printer panel and select maintenance option and print a maintenance page ...if the problem still persist .. you need to replace a new cartridge in order to get a good quality of print-outs.

...cartridge twice and it continues not to print in color. Here are the basics to check from Kodak: Verify that the ink cartridges are intact and securely inserted into the printhead, then make the same ...