...brake light does work, & my turn signals work. I have always had a btrry pwr drain when car off. I suspect my Turn Signal/Mutifunction Lever (Combination Switch) needs replacing, and a door jamb ...
...brake light switch operates brake lights and if bad you will not be able to shift it out of park, as well as the brake lights not coming on.! because you have to put foot on brake to do so. if bad ...
...brake lights but hey all run through this switch because of hazards and high beams. I got a new switch from dealer and all is working great now. Here39;s a link a link I used for switch replacement ...
...on steering colum and still don39;t work. Checked fuses and they are ok. Also I can pull switch back and get my high beams. Blinkers and brake lights are ok. Need help!!! Check these fusible
switch is notorious for burning out because there is NO RELAY on this vehicle, and there is a recall (#819) but this only affects 3500 models even though the headlight wiring is the same for 1500,2500
Question about Isuzu Rodeo
...not together with switch pulled all the way out as normal. Flashers, brake, and signal lights all worK. Any other ideas? Headlight switch is worn out, had the same thing on an old Ford pickup
Question about Isuzu Rodeo
Switch or Brake Light Test Switch • 40 Brake Light Switch or Pedal Value Signal • 42 Multi Function Steering Wheel- Plausibility • 43 Multi Function Steering Wheel: Button • 45 Multi Function Steering
Question about Isuzu Rodeo
brake assembly, disconnect the front suspension, remove the air intake, battery box, and disconnect the ****** switch lever to do so. You will also have to remove both of the lower crossmembers. It is
brake switch on the pedal just above the area where your foot is. Hope this helps... Hi, first check the 15 amp Stop Light Fuse. If that is good, pull the connector off the stop light switch above the
785 questions posted
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
623 Questions