1997 Isuzu Rodeo "replaced brake light won 39" Questions

...brake light switch at the brake pedal arm under the dash? If not do so, it is likley the problem. check the fuses and bulbs if that don't work check the brake switch with a test light go through ...

...brake light won't turn on and won't turn back on. Does this mean I need to replace my brake light bulb? on your brake pedal yuo have a switch to turn off the brake lights when not in use and ...

...or the connection. __________ Multi-Cardiag M8 CDP for car and truck There's a switch on the brake pedal arm that controls the brace lights. It may need to be adjusted or replaced. Hope this

replaced a cracked rear tail light with an after market new light. Now the brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and

...that actuates a release solenoid for the shifter. If this switch is bad, it won't shift out of gear and most likely the brake lights won't work. Replacing this switch should fix your

your brake light switch. Located at the bottom by your brake pedal. Maybe it's the switch on the brake pedal arm that controls the brace lights. It may need to be adjusted or replaced. Hope this helps

...turn off after releasing brake Do you have cruise control? Does it work? If it doesn't then most likely you need to replace the brake light switch. The switch can be found on the brake pedal

replaced brake light switch behind pedal, replaced bulbs. Turn signal, 4-way, running lights, reverse lights all work. Brake lights do not when pedal is depressed, any ideas? maybe the bad connection.

...Have you checked the brake light switch by the brake pedal? Maybe it's the switch on the brake pedal arm that controls the brace lights. It may need to be adjusted or replaced. Hope this

brake lights won't work.... replaced fuse it's fine, top light on hatch works, but right and left don't need to check the multi-function switch. the brake light signal goes through the ...